CAD CAM EDM DRO - Yahoo Group Archive

Re: cast iron

Posted by ballendo@y...
on 2001-02-09 03:53:54 UTC
Ya just gotta love this list!

I asked the stress relief/ aging questions on a "casting" list, but
the best responses have been here. They are a "quieter" list, so
maybe they will add something to this. If so, I'll mention it.

Thank you Jay H! (also the others who have responded)

Ballendo

> Jay Hayes wrote:
> I set up heat treat furnaces for foundries. The heat profile for
> cast iron can differ greatly depending on the type of cast iron,
> its thickness and geometry. <snip>

Discussion Thread

Carlos Guillermo 2001-02-08 09:35:50 UTC cast iron dave engvall 2001-02-08 09:56:38 UTC Re: [CAD_CAM_EDM_DRO] cast iron Joe Vicars 2001-02-08 10:36:33 UTC Re: [CAD_CAM_EDM_DRO] cast iron ballendo@y... 2001-02-08 11:08:19 UTC Re: [CAD_CAM_EDM_DRO] cast iron Dan Mauch 2001-02-08 11:09:08 UTC Re: [CAD_CAM_EDM_DRO] cast iron Carlos Guillermo 2001-02-08 11:54:52 UTC RE: [CAD_CAM_EDM_DRO] cast iron ballendo@y... 2001-02-08 12:02:34 UTC RE: [CAD_CAM_EDM_DRO] cast iron James Owens 2001-02-08 12:57:13 UTC Re: [CAD_CAM_EDM_DRO] cast iron Alan Marconett KM6VV 2001-02-08 13:10:10 UTC Re: [CAD_CAM_EDM_DRO] cast iron ballendo@y... 2001-02-08 13:56:34 UTC Re: cast iron Carlos Guillermo 2001-02-08 14:08:17 UTC RE: [CAD_CAM_EDM_DRO] cast iron dave.schultz@s... 2001-02-08 15:37:07 UTC Re: cast iron ballendo@y... 2001-02-08 15:46:22 UTC re:Re: cast iron (stress relieving) dave.schultz@s... 2001-02-08 16:04:52 UTC re:Re: cast iron (stress relieving) dave engvall 2001-02-08 16:43:51 UTC Re: [CAD_CAM_EDM_DRO] cast iron Carlos Guillermo 2001-02-08 17:58:10 UTC RE: [CAD_CAM_EDM_DRO] cast iron Sven Peter, TAD S.A. 2001-02-08 18:40:36 UTC Re: [CAD_CAM_EDM_DRO] cast iron davemucha@j... 2001-02-08 20:19:57 UTC re:Re: cast iron (stress relieving) davemucha@j... 2001-02-08 20:23:46 UTC re:Re: cast iron (stress relieving) Smoke 2001-02-08 20:49:54 UTC Re: [CAD_CAM_EDM_DRO] cast iron Jay Hayes 2001-02-08 22:25:01 UTC Re: [CAD_CAM_EDM_DRO] cast iron ballendo@y... 2001-02-09 03:53:54 UTC Re: cast iron James Owens 2001-02-09 04:15:01 UTC Re: [CAD_CAM_EDM_DRO] Re: cast iron Carlos Guillermo 2001-02-09 06:44:34 UTC cast iron ballendo@y... 2001-02-09 12:22:14 UTC RE:re:Re: cast iron Smoke 2001-02-09 13:08:19 UTC Re: [CAD_CAM_EDM_DRO] cast iron machines@n... 2001-02-09 16:03:26 UTC Re: cast iron Smoke 2001-02-10 08:28:33 UTC Re: [CAD_CAM_EDM_DRO] Re: cast iron Smoke 2001-02-10 08:37:34 UTC Re: [CAD_CAM_EDM_DRO] cast iron dave engvall 2001-02-10 10:04:07 UTC Re: [CAD_CAM_EDM_DRO] Re: cast iron davemucha@j... 2001-02-10 14:09:17 UTC Re: cast iron James Owens 2001-02-10 14:43:58 UTC Re: [CAD_CAM_EDM_DRO] RE:re:Re: cast iron davemucha@j... 2001-02-10 18:08:39 UTC RE:re:Re: cast iron