Re: [CAD_CAM_EDM_DRO] Threadmill
Posted by
Alan Marconett KM6VV
on 2001-03-06 22:55:42 UTC
Hi John,
Thanks for posting the threadmill pix. So the threadmill spins in the
collet, and the part makes 1 rev, and moves up one pitch? Looks like
the "thread" part is in holder at a slight angle? Is this something I
can grind out of a tap and try myself, or do they make a threadmill
small enough for a Sherline?
Alan KM6VV
John Stevenson wrote:
Thanks for posting the threadmill pix. So the threadmill spins in the
collet, and the part makes 1 rev, and moves up one pitch? Looks like
the "thread" part is in holder at a slight angle? Is this something I
can grind out of a tap and try myself, or do they make a threadmill
small enough for a Sherline?
Alan KM6VV
John Stevenson wrote:
>
> OK Guys,
> I have uploaded a file to the files section called Threadmill.jpg
> This shows One holder in a collet chuck and a second tool on the
> right.
> The brass test piece is in the middle and is about 2" diameter. This
> thread of 8TPI was cut in one pass and one revolution. As an idea of
> scale the holder on the left has a 3/4" shank.
> I also use this tool to screwcut internal threads on the lathe.
> John Stevenson
Discussion Thread
John Stevenson
2001-03-06 18:36:41 UTC
Threadmill
Jon Anderson
2001-03-06 18:53:56 UTC
Re: [CAD_CAM_EDM_DRO] Threadmill
Alan Marconett KM6VV
2001-03-06 22:55:42 UTC
Re: [CAD_CAM_EDM_DRO] Threadmill
John Stevenson
2001-03-07 08:18:11 UTC
Re: Threadmill
John Stevenson
2001-03-07 08:28:01 UTC
Re: Threadmill
Jon Elson
2001-03-07 11:19:59 UTC
Re: [CAD_CAM_EDM_DRO] Threadmill
Alan Marconett KM6VV
2001-03-07 11:20:31 UTC
Re: Threadmill
Tony Jeffree
2001-03-08 01:17:03 UTC
Re: Threadmill
Alan Marconett KM6VV
2001-03-08 10:41:43 UTC
Re: Threadmill
Drew Rogge
2001-03-08 10:56:06 UTC
Re: [CAD_CAM_EDM_DRO] Re: Threadmill
Joe Vicars
2001-03-08 11:45:18 UTC
Re: [CAD_CAM_EDM_DRO] Re: Threadmill
Jon Anderson
2001-03-08 12:03:19 UTC
Re: [CAD_CAM_EDM_DRO] Re: Threadmill
dougrasmussen@c...
2001-03-08 12:42:58 UTC
Re: Threadmill