Re: [CAD_CAM_EDM_DRO] Re: GeckoDrives.. Servo motor
Posted by
Dan Mauch
on 2001-03-15 06:58:32 UTC
The motors are rated at 420oz in. peak torque and 210 oz in continuously.
They are awesome on a mill drill with ballscrews. On my no name imported
mill/drill with ballscrews I get 180" IPM using those motors with a 2/1
reduction. Dan
-Dan
They are awesome on a mill drill with ballscrews. On my no name imported
mill/drill with ballscrews I get 180" IPM using those motors with a 2/1
reduction. Dan
-Dan
Discussion Thread
Dan Mauch
2001-03-15 06:58:32 UTC
Re: [CAD_CAM_EDM_DRO] Re: GeckoDrives.. Servo motor
cadman@p...
2001-03-15 08:14:59 UTC
GeckoDrives help... Thanks to all
ballendo@y...
2001-03-16 05:10:52 UTC
Dan Ms' Mill drill Re: GeckoDrives.. Servo motor
Dan Mauch
2001-03-16 07:42:52 UTC
Re: [CAD_CAM_EDM_DRO] Dan Ms' Mill drill Re: GeckoDrives.. Servo motor
Joel Jacobs
2001-03-16 08:26:53 UTC
Re: [CAD_CAM_EDM_DRO] Dan Ms' Mill drill Re: GeckoDrives.. Servo motor
Dan Mauch
2001-03-16 09:33:18 UTC
Re: [CAD_CAM_EDM_DRO] Dan Ms' Mill drill Re: GeckoDrives.. Servo motor
dave engvall
2001-03-16 10:29:52 UTC
Re: [CAD_CAM_EDM_DRO] Dan Ms' Mill drill Re: GeckoDrives.. Servo motor
ballendo@y...
2001-03-16 15:50:02 UTC
Dan Ms' Mill drill Re: GeckoDrives.. Servo motor
ballendo@y...
2001-03-16 16:10:30 UTC
mill drill gibs was Dan Ms' Mill drill Re: GeckoDrives.. Servo motor
Peter Smith
2001-03-17 07:27:01 UTC
Re: [CAD_CAM_EDM_DRO] mill drill gibs was Dan Ms' Mill drill Re: GeckoDrives.. Servo motor