Re: [CAD_CAM_EDM_DRO] Dan Ms' Mill drill Re: GeckoDrives.. Servo motor
Posted by
dave engvall
on 2001-03-16 10:29:52 UTC
Dan Mauch wrote:
Ended up with about 25 thou of backlash before I sold the thing.
Dave
ps.
Didn't pay much more for a decent piece of American iron with ballscrews... <big big grin>
What is more it has most of the goodies that the HSM series to fix the deficiencies implements.
> What is even worse that the backlash with these machines is that the acmeThat 0.001"/in error seems to be consistent.
> leadscrew pitch was off. I measured mine at being off short by .010 in ten
> inches with the backlash taken up.
Ended up with about 25 thou of backlash before I sold the thing.
>I ended up brazing a bracket on the end of the gib so I could do a decent adjustment and have it stay put.
>
> >Dan,
> >Did you do anything with your gibb adjustments? On mine the slot in the
> >gibb that the adjustment screw head rides in is wider than the screw head
> >and the gibb moves back and forth a bit everytime the axis changes
> >direction. Also there is no way to lock the adjustment down, so It wanders
> >around on it's own.
Dave
ps.
Didn't pay much more for a decent piece of American iron with ballscrews... <big big grin>
What is more it has most of the goodies that the HSM series to fix the deficiencies implements.
Discussion Thread
Dan Mauch
2001-03-15 06:58:32 UTC
Re: [CAD_CAM_EDM_DRO] Re: GeckoDrives.. Servo motor
cadman@p...
2001-03-15 08:14:59 UTC
GeckoDrives help... Thanks to all
ballendo@y...
2001-03-16 05:10:52 UTC
Dan Ms' Mill drill Re: GeckoDrives.. Servo motor
Dan Mauch
2001-03-16 07:42:52 UTC
Re: [CAD_CAM_EDM_DRO] Dan Ms' Mill drill Re: GeckoDrives.. Servo motor
Joel Jacobs
2001-03-16 08:26:53 UTC
Re: [CAD_CAM_EDM_DRO] Dan Ms' Mill drill Re: GeckoDrives.. Servo motor
Dan Mauch
2001-03-16 09:33:18 UTC
Re: [CAD_CAM_EDM_DRO] Dan Ms' Mill drill Re: GeckoDrives.. Servo motor
dave engvall
2001-03-16 10:29:52 UTC
Re: [CAD_CAM_EDM_DRO] Dan Ms' Mill drill Re: GeckoDrives.. Servo motor
ballendo@y...
2001-03-16 15:50:02 UTC
Dan Ms' Mill drill Re: GeckoDrives.. Servo motor
ballendo@y...
2001-03-16 16:10:30 UTC
mill drill gibs was Dan Ms' Mill drill Re: GeckoDrives.. Servo motor
Peter Smith
2001-03-17 07:27:01 UTC
Re: [CAD_CAM_EDM_DRO] mill drill gibs was Dan Ms' Mill drill Re: GeckoDrives.. Servo motor