Re: Quiet list

I ran into that also. type in the command chmod +x 64stepper378.ini
and then chmod +x run.64step378

That will change the permission. The run file will have to be edited with
the correct port address and the right memory.
Dan
-----Original Message-----
From: DHolness@... <DHolness@...>
To: CAD_CAM_EDM_DRO@onelist.com <CAD_CAM_EDM_DRO@onelist.com>
Date: Monday, August 09, 1999 9:26 AM
Subject: Re: [CAD_CAM_EDM_DRO] Quiet list

>From: DHolness@...
>
> i to have the same problem with the agp video card. used the unlisted
>feature on the card selection list and choose svga driver. i had no

problem

>getting 5.2 to work on my drive. i used partion it software to reconfigure
>the drive then dregs to set up the partions.
>
>i forgot to mention the time i spent reading various books on linux
>
>--------------------------- ONElist Sponsor ----------------------------
>
>ONElist now has T-SHIRTS!
>For details and to order, go to:
>http://www.onelist.com/store/tshirts.html
>
>------------------------------------------------------------------------
>Welcome to CAD_CAM_EDM_DRO@...,an unmodulated list for the

discussion of shop built systems in the above catagories.

>To Unsubscribe, read archives, change to or from digest.
>Go to: http://www.onelist.com/isregistered.cgi
>Log on, and you will go to Member Center, and you can make changes there.
>bill,
>List Manager
>