CAD CAM EDM DRO - Yahoo Group Archive

Re: Re: +/- 10V Gecko

Posted by Ray
on 2001-03-22 19:51:27 UTC
From: Jon Elson <jmelson@...>

mariss92705@... wrote:
<s>
>> A voltage amplifier behaves exactly as you describe in closed loop
>> operation. This is primarily because of the additional 90 degree
>> phase lag introduced when compared against a transconductance
>> amplifier. IR compensation introduces phase lead which improves the
>> loop phase margin somewhat.
>>
>> A voltage amplifier has uses other than driving a motor.

>Certainly!

I once saw a bunch of big Gettys servo drives at a rock concert. They were
running parallel connected speakers at about 3 kw output on each amp.

Think of it, with four Gecko 330's you can have 6.4 kw surround sound.
Even the neighbors dog will leave the patch!

Ray

Discussion Thread

mariss92705@y... 2001-03-21 16:06:04 UTC +/- 10V Gecko Matt Shaver 2001-03-21 17:28:51 UTC Re: [CAD_CAM_EDM_DRO] +/- 10V Gecko mariss92705@y... 2001-03-21 18:01:20 UTC Re: +/- 10V Gecko Jon Elson 2001-03-21 21:03:54 UTC Re: [CAD_CAM_EDM_DRO] +/- 10V Gecko Brian Pitt 2001-03-21 22:07:23 UTC Re: [CAD_CAM_EDM_DRO] Re: +/- 10V Gecko mariss92705@y... 2001-03-21 22:14:41 UTC Re: +/- 10V Gecko Tom Eldredge 2001-03-22 08:21:30 UTC Re: [CAD_CAM_EDM_DRO] Re: +/- 10V Gecko mariss92705@y... 2001-03-22 09:18:47 UTC Re: +/- 10V Gecko Jon Elson 2001-03-22 11:39:58 UTC Re: [CAD_CAM_EDM_DRO] Re: +/- 10V Gecko Jon Elson 2001-03-22 12:15:25 UTC Re: [CAD_CAM_EDM_DRO] Re: +/- 10V Gecko mariss92705@y... 2001-03-22 13:06:44 UTC Re: +/- 10V Gecko Jon Elson 2001-03-22 14:52:10 UTC Re: [CAD_CAM_EDM_DRO] Re: +/- 10V Gecko Ray 2001-03-22 19:51:27 UTC Re: Re: +/- 10V Gecko Jon Elson 2001-03-22 21:51:19 UTC Re: [CAD_CAM_EDM_DRO] Re: Re: +/- 10V Gecko dave engvall 2001-03-22 22:40:25 UTC Re: [CAD_CAM_EDM_DRO] Re: Re: +/- 10V Gecko