DEEP POCKET MILLING
Posted by
Victor Cantu Jr.
on 2001-03-28 14:05:00 UTC
JON,
THE MATERIAL IS 12 LONG X 6 WIDE X 6.25 THICK. THE POCKET IS 10 LONG X 4 WIDE AND THRU LEAVING A 2.000" BORDER AROUND. I WILL BE USING A FADAL VERTICAL MILL. MY PLAN WAS TO USE A 3/4 MINICUTTER ABOUT 3000 RPM AND ABOUT -.600 PER PECK AND A FEED OF 20.IPM. DO YOU THINK THIS IS TO MUCH? THE POCKET HAS A .25 RADIUS IN THE CORNERS AND I WANT TO AVOID CHATTER WHAT DO YOU SUGGEST. YOUR INPUT IS GREATLY APPRECIATED.
VIC
[Non-text portions of this message have been removed]
THE MATERIAL IS 12 LONG X 6 WIDE X 6.25 THICK. THE POCKET IS 10 LONG X 4 WIDE AND THRU LEAVING A 2.000" BORDER AROUND. I WILL BE USING A FADAL VERTICAL MILL. MY PLAN WAS TO USE A 3/4 MINICUTTER ABOUT 3000 RPM AND ABOUT -.600 PER PECK AND A FEED OF 20.IPM. DO YOU THINK THIS IS TO MUCH? THE POCKET HAS A .25 RADIUS IN THE CORNERS AND I WANT TO AVOID CHATTER WHAT DO YOU SUGGEST. YOUR INPUT IS GREATLY APPRECIATED.
VIC
[Non-text portions of this message have been removed]
Discussion Thread
Victor Cantu Jr.
2001-03-28 02:19:05 UTC
DEEP POCKET MILLING
Jon Elson
2001-03-28 11:49:43 UTC
Re: [CAD_CAM_EDM_DRO] DEEP POCKET MILLING
John Stevenson
2001-03-28 12:19:51 UTC
Re: DEEP POCKET MILLING
Victor Cantu Jr.
2001-03-28 14:05:00 UTC
DEEP POCKET MILLING
Jon Elson
2001-03-28 14:38:16 UTC
Re: [CAD_CAM_EDM_DRO] DEEP POCKET MILLING
Hugh Prescott
2001-03-28 14:54:52 UTC
Re: [CAD_CAM_EDM_DRO] DEEP POCKET MILLING
Smoke
2001-03-28 20:57:53 UTC
Re: [CAD_CAM_EDM_DRO] DEEP POCKET MILLING
Smoke
2001-03-28 21:21:14 UTC
Re: [CAD_CAM_EDM_DRO] DEEP POCKET MILLING
diazden
2001-03-29 16:51:48 UTC
Re: [CAD_CAM_EDM_DRO] DEEP POCKET MILLING
Joel Jacobs
2001-03-30 07:14:11 UTC
Re: [CAD_CAM_EDM_DRO] DEEP POCKET MILLING