CAD CAM EDM DRO - Yahoo Group Archive

Re: CNCpro VS Artisan VS flashcut

Posted by cadman@p...
on 2001-04-03 16:08:30 UTC
You may not be able to share the Dos machine on the net. But you can
share any Windows directory on the net. Can't you get TCP/IP going on
the Dos box and then issue the command.....
"Net use e: \\computername\share" and then pull the files you need to
the Dos box?

CADMAN

--- In CAD_CAM_EDM_DRO@y..., Tim Goldstein <timg@k...> wrote:
> This is only usable to make DOS a network client, not to allow you
to share
> files from a DOS machine. It is also available from an NT 4.0 server
machine
> and the NT 4.0 install disks. There is an applet that lets you build
a
> floppy with the required files.
>
> Tim
> [Denver, CO]
>
> > > sneaker net since I have to use floppies
> > > with the DOS based machines.
> >
> > This might be of some help to you. If you FTP to Microsoft
> > you should be
> > able to find a freely available DOS Microsoft Network
> > program. I don't
> > remember what it is called exactly and it was a few years
> > back that I got
> > it. But it will allow you to network to your DOS machines. I
> > used on one of
> > my machines some time back. If fact, if you can't locate it
> > I may be able
> > to find it and email it to you.
> >
> > Claton Cadmus
> >
> > FAQ: http://www.ktmarketing.com/faq.html

Discussion Thread

Peter Chen 2001-04-03 13:38:13 UTC CNCpro VS Artisan VS flashcut Jon Anderson 2001-04-03 13:46:29 UTC Re: [CAD_CAM_EDM_DRO] CNCpro VS Artisan VS flashcut Larry Edington 2001-04-03 15:06:17 UTC Re: [CAD_CAM_EDM_DRO] CNCpro VS Artisan VS flashcut cla@m... 2001-04-03 15:24:48 UTC Re: [CAD_CAM_EDM_DRO] CNCpro VS Artisan VS flashcut Tim Goldstein 2001-04-03 15:57:05 UTC RE: [CAD_CAM_EDM_DRO] CNCpro VS Artisan VS flashcut cadman@p... 2001-04-03 16:08:30 UTC Re: CNCpro VS Artisan VS flashcut Larry Edington 2001-04-03 17:13:29 UTC Re: [CAD_CAM_EDM_DRO] CNCpro VS Artisan VS flashcut Tom Murray 2001-04-03 22:49:30 UTC Give your sneaks a rest... cadman@p... 2001-04-03 22:56:27 UTC Re: CNCpro VS Artisan VS flashcut Larry Edington 2001-04-03 23:21:20 UTC Re: [CAD_CAM_EDM_DRO] Re: CNCpro VS Artisan VS flashcut Larry Edington 2001-04-03 23:41:17 UTC Re: [CAD_CAM_EDM_DRO] Give your sneaks a rest... ballendo@y... 2001-04-04 05:08:55 UTC sneakernet was Re: CNCpro VS Artisan VS flashcut Peter Chen 2001-04-04 05:49:43 UTC CNCpro VS Artisan VS flashcut Tom Eldredge 2001-04-04 07:33:04 UTC Re: [CAD_CAM_EDM_DRO] CNCpro VS Artisan VS flashcut Ray 2001-04-04 08:15:56 UTC Re: CNCpro VS Artisan VS flashcut cadman@p... 2001-04-04 08:25:32 UTC Re: Give your sneaks a rest... Alan Marconett KM6VV 2001-04-04 16:38:53 UTC Re: [CAD_CAM_EDM_DRO] Give your sneaks a rest... Larry Edington 2001-04-04 21:50:43 UTC Re: [CAD_CAM_EDM_DRO] Give your sneaks a rest...