Re: [CAD_CAM_EDM_DRO] Re: Hardinge Conversions
Posted by
e.heritage@b...
on 2001-04-20 12:03:17 UTC
Here in the UK you can buy a 1000kg of scrap steel for £5 if you're buying
in bulk! That 'scrap' squashed into a piece of square tubing costs me £36
for a few kilos. There's been a major decline in people interested in metal
working here but how do you build all those coffee bars without _coooool_
stainless signs? : )
Providing coffee for all,
John
in bulk! That 'scrap' squashed into a piece of square tubing costs me £36
for a few kilos. There's been a major decline in people interested in metal
working here but how do you build all those coffee bars without _coooool_
stainless signs? : )
Providing coffee for all,
John
----- Original Message -----
From: "Jerry Kimberlin" <kimberln@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Friday, April 20, 2001 3:07 PM
Subject: Re: [CAD_CAM_EDM_DRO] Re: Hardinge Conversions
> Joe Vicars wrote:
> >
> > Jerry,
> > Yes, I have been looking for a source of economical Cast Iron. If
you look at MSC it's just a cheap to by pre-hard and ground.
> > I am investigating your source.
>
> Joe, I think you will find them cheaper than any other place for
> cast iron. I think they are a little more expensive for steel
> than local places.
>
> Note that they give web orders a discount. Also a discount if
> you buy over a certain dollar amount. Also the prices include
> shipping so there is no add on charge there. So for cast iron, I
> haven't found better for small orders. If you want a ton of cast
> iron, order from Castle Metals.
>
> Cheers,
>
> JerryK
>
> Welcome to CAD_CAM_EDM_DRO@...,an unmoderated list for the
discussion of shop built systems, for CAD, CAM, EDM, and DRO.
>
> Addresses:
> Post message: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Manager
>
> FAQ: http://www.ktmarketing.com/faq.html
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>
Discussion Thread
Joe Vicars
2001-04-19 06:50:11 UTC
Hardinge Conversions
dougrasmussen@c...
2001-04-19 09:55:25 UTC
Re: Hardinge Conversions
Joe Vicars
2001-04-19 12:08:35 UTC
Re: [CAD_CAM_EDM_DRO] Re: Hardinge Conversions
ptengin@a...
2001-04-19 12:35:31 UTC
Re: [CAD_CAM_EDM_DRO] Re: Hardinge Conversions
Jerry Kimberlin
2001-04-19 18:45:39 UTC
Re: [CAD_CAM_EDM_DRO] Re: Hardinge Conversions
Joe Vicars
2001-04-20 06:29:59 UTC
Re: [CAD_CAM_EDM_DRO] Re: Hardinge Conversions
Jerry Kimberlin
2001-04-20 07:06:55 UTC
Re: [CAD_CAM_EDM_DRO] Re: Hardinge Conversions
dave engvall
2001-04-20 08:52:02 UTC
Re: [CAD_CAM_EDM_DRO] Re: Hardinge Conversions
e.heritage@b...
2001-04-20 12:03:17 UTC
Re: [CAD_CAM_EDM_DRO] Re: Hardinge Conversions
Marcus & Eva
2001-04-20 20:20:38 UTC
Re: [CAD_CAM_EDM_DRO] Re: Hardinge Conversions
Smoke
2001-04-20 20:38:00 UTC
Re: [CAD_CAM_EDM_DRO] Re: Hardinge Conversions
ballendo@y...
2001-04-21 02:44:55 UTC
an interesting material was Re: Hardinge Conversions
Smoke
2001-04-21 06:38:49 UTC
Re: [CAD_CAM_EDM_DRO] an interesting material was Re: Hardinge Conversions