Re: [CAD_CAM_EDM_DRO] Off topic, inverters / rectifiers
Posted by
Doug Harrison
on 2001-07-09 20:19:27 UTC
----- Original Message -----
From: Jon Elson <elson@...>
> No, most MIG's, especially the cheap ones, are AC. There is no rectifier.
>
Are you sure, Jon? Cheap stick welders are all AC but I'm not aware of any
MIG (wire feed) welders that are AC.
Perhaps you mean stick welders.
Doug
Discussion Thread
info.host@b...
2001-07-09 19:19:43 UTC
Off topic, inverters / rectifiers
Jon Elson
2001-07-09 19:58:00 UTC
Re: [CAD_CAM_EDM_DRO] Off topic, inverters / rectifiers
Doug Harrison
2001-07-09 20:12:49 UTC
Re: [CAD_CAM_EDM_DRO] Off topic, inverters / rectifiers
Doug Harrison
2001-07-09 20:19:27 UTC
Re: [CAD_CAM_EDM_DRO] Off topic, inverters / rectifiers
info.host@b...
2001-07-09 22:46:50 UTC
Re: [CAD_CAM_EDM_DRO] Off topic, inverters / rectifiers
Randy Gordon-Gilmore
2001-07-09 23:03:16 UTC
Not-so-off-topic: rectifiers
Jon Elson
2001-07-09 23:27:56 UTC
Re: [CAD_CAM_EDM_DRO] Off topic, inverters / rectifiers
Jon Elson
2001-07-09 23:37:36 UTC
Re: [CAD_CAM_EDM_DRO] Not-so-off-topic: rectifiers
Intellicorp001
2001-07-10 01:30:34 UTC
Re: Off topic, inverters / rectifiers
info.host@b...
2001-07-10 01:36:47 UTC
Re: [CAD_CAM_EDM_DRO] Re: Off topic, inverters / rectifiers
Carol & Jerry Jankura
2001-07-10 05:20:55 UTC
RE: [CAD_CAM_EDM_DRO] Not-so-off-topic: rectifiers
Tim Goldstein
2001-07-10 06:57:20 UTC
RE: [CAD_CAM_EDM_DRO] Re: Off topic, inverters / rectifiers
brian
2001-07-10 17:28:56 UTC
Re: [CAD_CAM_EDM_DRO] Not-so-off-topic: rectifiers
Randy Gordon-Gilmore
2001-07-12 17:00:05 UTC
Re: [CAD_CAM_EDM_DRO] Not-so-off-topic: rectifiers
JanRwl@A...
2001-07-12 19:00:11 UTC
Re: [CAD_CAM_EDM_DRO] Not-so-off-topic: rectifiers
alenz@c...
2001-07-12 19:09:24 UTC
Re: Not-so-off-topic: rectifiers
Jon Elson
2001-07-12 20:26:05 UTC
Re: [CAD_CAM_EDM_DRO] Not-so-off-topic: rectifiers
Randy Gordon-Gilmore
2001-07-12 21:22:05 UTC
Re: [CAD_CAM_EDM_DRO] Not-so-off-topic: rectifiers
Randy Gordon-Gilmore
2001-07-12 21:27:41 UTC
Re: [CAD_CAM_EDM_DRO] Not-so-off-topic: rectifiers
Carol & Jerry Jankura
2001-07-13 05:28:34 UTC
RE: [CAD_CAM_EDM_DRO] Re: Not-so-off-topic: rectifiers
Garry & Maxine Foster
2001-07-15 06:05:41 UTC
Re: [CAD_CAM_EDM_DRO] Off topic, inverters / rectifiers
info.host@b...
2001-07-15 10:47:06 UTC
Re: [CAD_CAM_EDM_DRO] Off topic, inverters / rectifiers