Re: [CAD_CAM_EDM_DRO] Off topic, inverters / rectifiers

Thanks for the speedy help. I'm sure most MIGs are DC also since they have
terminals on you can reverse to change polarity. Cheap stick ones are AC
'buzz-boxes'.

Thanks again!
John

> > No, most MIG's, especially the cheap ones, are AC. There is no

rectifier.

> >
> Are you sure, Jon? Cheap stick welders are all AC but I'm not aware of

any

> MIG (wire feed) welders that are AC.
>
> Perhaps you mean stick welders.
>
> Doug
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
> Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Manager
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>