Re: [CAD_CAM_EDM_DRO] Re: Making a punch die?

----- Original Message -----
From: "Alan Marconett KM6VV" <KM6VV@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Saturday, July 14, 2001 2:35 AM
Subject: [CAD_CAM_EDM_DRO] Re: Making a punch die?


> Hi list,
>
> I have to agree with Dan. Get a good quality nibbler! Since I've
> finally got a big compressor and some air tools, I'm wondering if there
> is an air powered nibbler? I saw something like a shear, but I don't
> think that would work.
>
> Alan KM6VV
>
>
> Dan Mauch wrote:
> >
> > I have to chime in here. I have one of those rat shack imported nibbing
> > tools and think they are terrible. When you nib through a piece of
> > aluminum they hurt your hand. They are very poorly made and
> > ergonomically they are bad. The nibbing die was so poorly hardened that
> > it didn't take long before the nibbed pieces were jamming in the die. I
> > strongly recommend that one avoid the imported version and get one that
> > ergonomically doesn't hurt your hand when nibbing.
> > Dan
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
> Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Manager
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>