CAD CAM EDM DRO - Yahoo Group Archive

Re: Making a punch die?

on 2001-07-14 19:14:42 UTC
Hi Mariano,

Thanks, I'm going to be watching for them. I got REAL lucky, and bought
a die grinder, drill, air hammer, and ratchet recently.

Alan KM6VV

diazden wrote:
>
> Alan;
> the air nibbler that I bought a couple of years ago was
> about $A 80 ( $US 45, ) also I have seen them electric
> regards
> mariano
>
> ----- Original Message -----
> From: "Alan Marconett KM6VV" <KM6VV@...>
> To: <CAD_CAM_EDM_DRO@yahoogroups.com>
> Sent: Saturday, July 14, 2001 2:35 AM
> Subject: [CAD_CAM_EDM_DRO] Re: Making a punch die?
>
> > Hi list,
> >
> > I have to agree with Dan. Get a good quality nibbler! Since I've
> > finally got a big compressor and some air tools, I'm wondering if there
> > is an air powered nibbler? I saw something like a shear, but I don't
> > think that would work.
> >
> > Alan KM6VV
> >
> >
> > Dan Mauch wrote:
> > >
> > > I have to chime in here. I have one of those rat shack imported nibbing
> > > tools and think they are terrible. When you nib through a piece of
> > > aluminum they hurt your hand. They are very poorly made and
> > > ergonomically they are bad. The nibbing die was so poorly hardened that
> > > it didn't take long before the nibbed pieces were jamming in the die. I
> > > strongly recommend that one avoid the imported version and get one that
> > > ergonomically doesn't hurt your hand when nibbing.
> > > Dan
> >

Discussion Thread

Joseph 2001-07-12 13:03:04 UTC Making a punch die? Alan Marconett KM6VV 2001-07-12 13:36:56 UTC Re: [CAD_CAM_EDM_DRO] Making a punch die? Joseph 2001-07-12 15:04:50 UTC Re: Making a punch die? Alan Marconett KM6VV 2001-07-12 15:26:41 UTC Re: Making a punch die? Spehro Pefhany 2001-07-12 15:43:10 UTC Re: [CAD_CAM_EDM_DRO] Making a punch die? cncdxf@a... 2001-07-12 15:48:14 UTC Re: Making a punch die? lew best 2001-07-12 16:14:10 UTC RE: [CAD_CAM_EDM_DRO] Re: Making a punch die? Alan Marconett KM6VV 2001-07-12 16:21:37 UTC Re: Making a punch die? Jon Elson 2001-07-12 20:04:44 UTC Re: [CAD_CAM_EDM_DRO] Making a punch die? Smoke 2001-07-12 20:05:25 UTC Re: [CAD_CAM_EDM_DRO] Making a punch die? Smoke 2001-07-12 20:07:53 UTC Re: [CAD_CAM_EDM_DRO] Making a punch die? Jon Elson 2001-07-12 20:17:47 UTC Re: [CAD_CAM_EDM_DRO] Re: Making a punch die? Jon Elson 2001-07-12 20:22:08 UTC Re: [CAD_CAM_EDM_DRO] Re: Making a punch die? Sven Peter, TAD S.A. 2001-07-12 21:10:33 UTC Re: [CAD_CAM_EDM_DRO] Re: Making a punch die? Joseph 2001-07-12 23:46:14 UTC Re: Making a punch die? Joseph 2001-07-13 00:00:19 UTC Re: Making a punch die? ptengin@a... 2001-07-13 00:23:31 UTC Re: [CAD_CAM_EDM_DRO] Making a punch die? Ian Wright 2001-07-13 02:00:28 UTC Re: [CAD_CAM_EDM_DRO] Making a punch die? machines@n... 2001-07-13 03:04:44 UTC Re: Making a punch die? Ian Wright 2001-07-13 06:29:10 UTC Re: [CAD_CAM_EDM_DRO] Re: Making a punch die? Fred Smith 2001-07-13 06:56:11 UTC Re: Making a punch die? Dan Mauch 2001-07-13 06:57:17 UTC RE: [CAD_CAM_EDM_DRO] Re: Making a punch die? Alan Marconett KM6VV 2001-07-13 09:21:01 UTC Re: [CAD_CAM_EDM_DRO] Making a punch die? Alan Marconett KM6VV 2001-07-13 09:37:17 UTC Re: Making a punch die? mdickey@b... 2001-07-13 10:08:47 UTC Re: Making a punch die? Jon Elson 2001-07-13 10:43:12 UTC Re: [CAD_CAM_EDM_DRO] Re: Making a punch die? Ron Yost 2001-07-13 10:54:59 UTC Re: [CAD_CAM_EDM_DRO] Re: Making a punch die? Smoke 2001-07-13 13:42:35 UTC Re: [CAD_CAM_EDM_DRO] Re: Making a punch die? Spehro Pefhany 2001-07-13 13:53:11 UTC Re: [CAD_CAM_EDM_DRO] Re: Making a punch die? Alan Marconett KM6VV 2001-07-13 17:18:57 UTC Re: Making a punch die? Joseph 2001-07-13 18:57:41 UTC Re: Making a punch die? lew best 2001-07-13 19:13:25 UTC RE: [CAD_CAM_EDM_DRO] Re: Making a punch die? IMService 2001-07-14 06:02:25 UTC Re:Re: Making a punch die? Dan Mauch 2001-07-14 08:27:25 UTC RE: [CAD_CAM_EDM_DRO] Re: Making a punch die? diazden 2001-07-14 18:20:22 UTC Re: [CAD_CAM_EDM_DRO] Making a punch die? diazden 2001-07-14 18:20:22 UTC Re: [CAD_CAM_EDM_DRO] Re: Making a punch die? Alan Marconett KM6VV 2001-07-14 19:14:42 UTC Re: Making a punch die?