Re: Red Hat 5.2

Thanks for the help. This is from the linux box. Now ALL I have to do is install the RT patch and EMC.
Matt, good to hear from you. If I can get this all set up and running on my BOSS 6 I may try developing a board to interface
EMC to the BOSS controls.
The servo system is what I want to work out for a BOSS 8. This should be fun.
Darrell

Matt Shaver wrote:

> From: "Matt Shaver" <mshaver@...>
>
> > From: "Darrell Gehlsen" <darrell@...>
> > The 168.191.236.2 seems to change from logon to logon.
>
> That's the IP address that is assigned to you when you log on.
>
> > > cat /etc/resolv.conf
> > > (to see if you have a nameserver configured)
> >
> > that responds with "search"
>
> Edit this file to look like:
>
> search machinemaster.com
> nameserver 123.456.789.10
> nameserver 123.456.789.11
>
> You will have to substitute the name of your ISP in the first line and also
> determine the correct addresses to use for the primary and secondary (if
> there is a secondary) nameservers. These addresses are probably in the
> paperwork from your ISP, or on their website.
>
> Matt
>
> P.S. The Machine Master kit I installed for a friend of mine a couple years
> ago is still working fine, although just recently the 5V supply died in the
> BOSS6 and he had me over to change the jumper on the interface card to
> internal power. Will you soon sell the interface card & cable separately for
> use with the EMC software?
>