Re: Tawagawa Seiki steppers
Posted by
cadcamcenter@y...
on 2001-07-30 16:04:51 UTC
brian wrote: "Hi, yea 5 phases, it's patent is held by Berger/Lahr
makers of steppers and other type drives. I dont know how many
wires,but i dont think the 5 wire ones are 5 phase."
It is stamped "5 Phase Stepper"
Jon: 'Yes, absolutely. (Now, not ALL 5 wire motors are 5 phase.)
But, my Vexta 5-phase motor and Super Vexta 5-phase driver have only
5 terminals for the motor connection. Both units clearly state they
are 5-phase on the name plate."
Contacted the local Oriental Motor office, but they were not too
cooperative when they found out I was trying to get a controller for
non-Vexta motors. Anyway Vexta seem expensive.
Peter
makers of steppers and other type drives. I dont know how many
wires,but i dont think the 5 wire ones are 5 phase."
It is stamped "5 Phase Stepper"
Jon: 'Yes, absolutely. (Now, not ALL 5 wire motors are 5 phase.)
But, my Vexta 5-phase motor and Super Vexta 5-phase driver have only
5 terminals for the motor connection. Both units clearly state they
are 5-phase on the name plate."
Contacted the local Oriental Motor office, but they were not too
cooperative when they found out I was trying to get a controller for
non-Vexta motors. Anyway Vexta seem expensive.
Peter
Discussion Thread
cadcamcenter@y...
2001-07-27 20:36:11 UTC
Tawagawa Seiki steppers
Jon Elson
2001-07-27 23:49:28 UTC
Re: [CAD_CAM_EDM_DRO] Tawagawa Seiki steppers
cadcamcenter@y...
2001-07-28 10:23:09 UTC
Re: Tawagawa Seiki steppers
cadcamcenter@y...
2001-07-28 10:37:37 UTC
Re: Tawagawa Seiki steppers
cadcamcenter@y...
2001-07-28 11:15:10 UTC
Re: Tawagawa Seiki steppers
Jon Elson
2001-07-28 16:31:44 UTC
Re: [CAD_CAM_EDM_DRO] Re: Tawagawa Seiki steppers
Alan Marconett KM6VV
2001-07-28 18:29:56 UTC
Re: [CAD_CAM_EDM_DRO] Re: Tawagawa Seiki steppers
Jon Elson
2001-07-28 21:26:11 UTC
Re: [CAD_CAM_EDM_DRO] Re: Tawagawa Seiki steppers
brian
2001-07-30 04:53:56 UTC
Re: [CAD_CAM_EDM_DRO] Re: Tawagawa Seiki steppers
Carey L. Culpepper
2001-07-30 07:59:11 UTC
Re: [CAD_CAM_EDM_DRO] Re: Tawagawa Seiki steppers
Jon Elson
2001-07-30 11:18:57 UTC
Re: [CAD_CAM_EDM_DRO] Re: Tawagawa Seiki steppers
Alan Marconett KM6VV
2001-07-30 11:26:29 UTC
Re: Tawagawa Seiki steppers
cadcamcenter@y...
2001-07-30 16:04:51 UTC
Re: Tawagawa Seiki steppers
Jon Elson
2001-07-30 20:23:38 UTC
Re: [CAD_CAM_EDM_DRO] Re: Tawagawa Seiki steppers
cadcamcenter@y...
2001-07-30 21:48:36 UTC
Re: Tawagawa Seiki steppers
Jon Elson
2001-07-30 23:12:43 UTC
Re: [CAD_CAM_EDM_DRO] Re: Tawagawa Seiki steppers
cadcamcenter@y...
2001-07-31 13:16:15 UTC
Re: Tawagawa Seiki steppers
Scott M. Thomas
2001-07-31 14:42:23 UTC
RE: [CAD_CAM_EDM_DRO] Re: Tawagawa Seiki steppers
Alan Marconett KM6VV
2001-07-31 15:05:28 UTC
Re: Tawagawa Seiki steppers
wanliker@a...
2001-07-31 19:33:35 UTC
Re: [CAD_CAM_EDM_DRO] Re: Tawagawa Seiki steppers
Jon Elson
2001-07-31 21:39:31 UTC
Re: [CAD_CAM_EDM_DRO] Re: Tawagawa Seiki steppers
cadcamcenter@y...
2001-07-31 23:45:40 UTC
Re: Tawagawa Seiki steppers
Ward M.
2001-07-31 23:59:41 UTC
RE: [CAD_CAM_EDM_DRO] Re: Tawagawa Seiki steppers
alan@n...
2001-08-01 12:10:35 UTC
Re: Tawagawa Seiki steppers
Carey L. Culpepper
2001-08-01 13:51:15 UTC
Re: [CAD_CAM_EDM_DRO] Re: Tawagawa Seiki steppers
Scott M. Thomas
2001-08-01 21:02:13 UTC
RE: [CAD_CAM_EDM_DRO] Re: Tawagawa Seiki steppers
Alan King
2001-08-01 22:06:14 UTC
Re: [CAD_CAM_EDM_DRO] Re: Tawagawa Seiki steppers
Alan Marconett KM6VV
2001-08-01 22:20:36 UTC
Re: Tawagawa Seiki steppers
Alan King
2001-08-01 23:30:45 UTC
Re: [CAD_CAM_EDM_DRO] Re: Tawagawa Seiki steppers
Alan Marconett KM6VV
2001-08-02 10:25:37 UTC
Re: Tawagawa Seiki steppers
cadcamcenter@y...
2001-08-03 00:59:20 UTC
auction payment was Seiki stepper
James Owens
2001-08-04 04:53:55 UTC
Re: [CAD_CAM_EDM_DRO] Re: Tawagawa Seiki steppers
Jon Elson
2001-08-04 10:32:37 UTC
Re: [CAD_CAM_EDM_DRO] Re: Tawagawa Seiki steppers
Scott M. Thomas
2001-08-10 10:27:23 UTC
RE: [CAD_CAM_EDM_DRO] Re: Tawagawa Seiki steppers
Alan King
2001-08-10 15:08:01 UTC
Re: [CAD_CAM_EDM_DRO] Re: Tawagawa Seiki steppers
Scott M. Thomas
2001-08-10 19:29:14 UTC
RE: [CAD_CAM_EDM_DRO] Re: Tawagawa Seiki steppers
Ward M.
2001-08-10 19:40:14 UTC
RE: [CAD_CAM_EDM_DRO] Re: Tawagawa Seiki steppers
Scott M. Thomas
2001-08-10 20:04:10 UTC
RE: [CAD_CAM_EDM_DRO] Re: Tawagawa Seiki steppers
Ward M.
2001-08-10 21:14:11 UTC
RE: [CAD_CAM_EDM_DRO] Re: Tawagawa Seiki steppers
Alan King
2001-08-10 22:19:01 UTC
Re: [CAD_CAM_EDM_DRO] Re: Tawagawa Seiki steppers
Scott M. Thomas
2001-08-12 11:45:30 UTC
RE: [CAD_CAM_EDM_DRO] Re: Tawagawa Seiki steppers
Scott M. Thomas
2001-08-12 12:07:29 UTC
RE: [CAD_CAM_EDM_DRO] Re: Tawagawa Seiki steppers
Alan King
2001-08-12 15:27:27 UTC
Re: [CAD_CAM_EDM_DRO] Re: Tawagawa Seiki steppers
cadcamcenter@y...
2001-08-23 14:45:25 UTC
Tawagawa Seiki steppers