Re: [CAD_CAM_EDM_DRO] Mechanical etching of PCB with MaxNC

If you would like send it to me via email and I'll run it through my
registered version of Kellycam and Isolator Pro.
I'll send you the files back so you can play with them.

I've got Pads 3.6. I'll also do a quick test with it.

later,
Larry E.

----- Original Message -----
From: "Alan Marconett KM6VV" <KM6VV@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Sunday, August 19, 2001 5:38 PM
Subject: Re: [CAD_CAM_EDM_DRO] Mechanical etching of PCB with MaxNC


> Hi Larry,
>
> It's an RS-274X. I believe it's from Pads (according to one of my
> engineers). I was thinking it was from Eagle, but no, it's a layer from
> a project at work.
>
> Alan KM6VV
>
>
> Larry Edington wrote:
> >
> > It's gotta be an X. ( RS-274X with embedded aperatures ).
> >
> > later,
> > Larry E.
> >
> > ----- Original Message -----
> > From: "Alan Marconett KM6VV" <KM6VV@...>
> > To: <CAD_CAM_EDM_DRO@yahoogroups.com>
> > Sent: Friday, August 17, 2001 12:07 AM
> > Subject: Re: [CAD_CAM_EDM_DRO] Mechanical etching of PCB with MaxNC
> >
> > > Hi Larry,
> > >
> > > I tried a Gerber file from Eagle on Kellycam, it wouldn't work.
Emailed
> > > Kelly, and he requested a file. I haven't heard what he found out
yet.
> > > I'm wondering if it was a 'D' or 'X' I sent. I can't remember, and
I'm
> > > on vacation, away from my office.
> > >
> > > Alan KM6VV
> > >
> > > Larry Edington wrote:
> > > >
> > > > Save yourself some time and energy. Spend another $125 and buy
Kellycam
> > > > www.kellyware.com
> > > >
> > > > It will import RS-274X ( embedded aperature gerber files ) and
output
> > > > isolation paths as G code.
> > > >
> > > > Then use your favorite cnc control to cut them. I wouldn't recommend
> > > > Kellycam to run the stepper motors though. The motion is not very
> > smooth.
> > > >
> > > > However, I would recommend Master5CNC. I use Kellycam to generate my
> > > > toolpaths now and then Master5 to cut the traces.
> > > >
> > > > I do have the $2K Isolator Pro software but it only outputs HPGL.
> > Isolator
> > > > has more features but Kellycam gets the isolation job done quite
well.
> > > >
> > > > later,
> > > > Larry E.
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
> Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Manager
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>