Re: [CAD_CAM_EDM_DRO] Digest Number 1579
Posted by
info.host@b...
on 2001-08-21 16:51:15 UTC
Also, pre-birth babies doctors are worried about. They are ultra sounded
then built out of wax using the machine. It is the size of a desktop and has
a metal tray inside with holes in. The tray is submerged in a good few pints
of the wax resin stuff then the lasers heat and fuse it. The tray slowly
raises out of the wax, I assume the lasers only move along one plane and let
the table move the other. The model finally comes out of the pool fully
formed and set. They look expensive but fun, as most expensive things do.
John
then built out of wax using the machine. It is the size of a desktop and has
a metal tray inside with holes in. The tray is submerged in a good few pints
of the wax resin stuff then the lasers heat and fuse it. The tray slowly
raises out of the wax, I assume the lasers only move along one plane and let
the table move the other. The model finally comes out of the pool fully
formed and set. They look expensive but fun, as most expensive things do.
John
> Someone does. I saw something on TV about it quite some time ago wherethey
> were using the lasers to reproduce a skull in resin.
>
> That's all I remember, so I can't furnish any other details
>
> Smoke
>
>
> >Has anybody been using
> >this 2-laser technique at a larger (maybe even visible) scale?
> >Andrew
> >
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
> Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Manager
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
Discussion Thread
Andrew Werby
2001-08-20 22:28:18 UTC
Re: [CAD_CAM_EDM_DRO] Digest Number 1579
Smoke
2001-08-21 16:31:19 UTC
Re: [CAD_CAM_EDM_DRO] Digest Number 1579
info.host@b...
2001-08-21 16:51:15 UTC
Re: [CAD_CAM_EDM_DRO] Digest Number 1579
Marcus & Eva
2001-08-21 19:07:56 UTC
Re: [CAD_CAM_EDM_DRO] Digest Number 1579
hllrsr@c...
2001-08-22 14:03:12 UTC
Re: [CAD_CAM_EDM_DRO] Digest Number 1579
brian
2001-08-22 19:16:40 UTC
Re: [CAD_CAM_EDM_DRO] Digest Number 1579
brian
2001-08-22 19:53:30 UTC
Re: [CAD_CAM_EDM_DRO] Digest Number 1579
William Scalione
2001-08-23 06:45:57 UTC
Re: [CAD_CAM_EDM_DRO] Digest Number 1579
Fred Smith
2001-08-23 10:50:05 UTC
Re: Digest Number 1579
cadcamcenter@y...
2001-08-23 14:44:28 UTC
Re: Digest Number 1579
Fred Smith
2001-08-23 17:30:29 UTC
Re: StlWork2 discounts was Digest Number 1579