CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] Digest Number 1579

Posted by brian
on 2001-08-22 19:53:30 UTC
Hi, the other project they did with the 40$m machine was to make an ignition
rotor cap for a Chevy v-8. (value about $6.00!)he he. cul brian f.
----- Original Message -----
From: <hllrsr@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Wednesday, August 22, 2001 4:51 PM
Subject: Re: [CAD_CAM_EDM_DRO] Digest Number 1579


> I think it was in Model Airplane News 2-3 yrs back, an article about a
> Top Gun competitor who worked at Boeing in the engineering dept.
>
> He used their system to make EXACT scale landing gear for his model by
> scaling the full size CAD file, and running the parts off in the R&D's
> stereo lithography tank to make patterns for molding the struts.
>
> ~$40 million system to make 3 parts less than 4" long.
>
> Must be nice to have access to that sort of toys <vbg>!
>
> Iain
>
>
> Smoke wrote:
> >
> > Someone does. I saw something on TV about it quite some time ago where
they
> > were using the lasers to reproduce a skull in resin.
> >
> > That's all I remember, so I can't furnish any other details
> >
> > Smoke
> >
> > >Has anybody been using
> > >this 2-laser technique at a larger (maybe even visible) scale?
> > >Andrew
> > >
> >
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
> Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Manager
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>

Discussion Thread

Andrew Werby 2001-08-20 22:28:18 UTC Re: [CAD_CAM_EDM_DRO] Digest Number 1579 Smoke 2001-08-21 16:31:19 UTC Re: [CAD_CAM_EDM_DRO] Digest Number 1579 info.host@b... 2001-08-21 16:51:15 UTC Re: [CAD_CAM_EDM_DRO] Digest Number 1579 Marcus & Eva 2001-08-21 19:07:56 UTC Re: [CAD_CAM_EDM_DRO] Digest Number 1579 hllrsr@c... 2001-08-22 14:03:12 UTC Re: [CAD_CAM_EDM_DRO] Digest Number 1579 brian 2001-08-22 19:16:40 UTC Re: [CAD_CAM_EDM_DRO] Digest Number 1579 brian 2001-08-22 19:53:30 UTC Re: [CAD_CAM_EDM_DRO] Digest Number 1579 William Scalione 2001-08-23 06:45:57 UTC Re: [CAD_CAM_EDM_DRO] Digest Number 1579 Fred Smith 2001-08-23 10:50:05 UTC Re: Digest Number 1579 cadcamcenter@y... 2001-08-23 14:44:28 UTC Re: Digest Number 1579 Fred Smith 2001-08-23 17:30:29 UTC Re: StlWork2 discounts was Digest Number 1579