RE: [CAD_CAM_EDM_DRO] linear encoder to control rotary indexer??
Posted by
Gail & Bryan Harries
on 2001-08-29 08:47:31 UTC
Smoke,
I believe you posted that to the Lathe 2000 group??? but don't quote me on
that ;)
Bryan
-----Original Message-----
From: Smoke [mailto:gordonr@...]
Sent: Wednesday, 29 August, 2001 11:03 AM
To: CAD_CAM_EDM_DRO@yahoogroups.com
Subject: Re: [CAD_CAM_EDM_DRO] linear encoder to control rotary
indexer??
As a gunsmith and machine retired machine designer, methinks it would be
much easier and cheaper to build your machine so as to contol the lead
mechanically rather than electronically. This would also guarantee
following the reverse path exactly as well as eliminate the need for a
computer or any programming. All you'd need in the way of electronics would
be an on/off switch and a couple of limit switches for travel.
I posted a design someplace earlier this year (don't remember exactly which
site I posted it on) for an attachment that could be mounted on a standard
lathe for building a rifiling machine.
Smoke
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
Moderator: jmelson@... timg@... [Moderator]
URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
bill,
List Manager
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
I believe you posted that to the Lathe 2000 group??? but don't quote me on
that ;)
Bryan
-----Original Message-----
From: Smoke [mailto:gordonr@...]
Sent: Wednesday, 29 August, 2001 11:03 AM
To: CAD_CAM_EDM_DRO@yahoogroups.com
Subject: Re: [CAD_CAM_EDM_DRO] linear encoder to control rotary
indexer??
As a gunsmith and machine retired machine designer, methinks it would be
much easier and cheaper to build your machine so as to contol the lead
mechanically rather than electronically. This would also guarantee
following the reverse path exactly as well as eliminate the need for a
computer or any programming. All you'd need in the way of electronics would
be an on/off switch and a couple of limit switches for travel.
I posted a design someplace earlier this year (don't remember exactly which
site I posted it on) for an attachment that could be mounted on a standard
lathe for building a rifiling machine.
Smoke
>I am trying to build a rifling machine. I was planning on using the indexerAddresses:
>to rotate the cutter as it's pulled though the barrel. So if I could just
>make the indexer rotate at the desired rate as it's moved along it should
>work. It would also need to be able to follow the exact path in reverse.
>Thanks, Brad
>
>>
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
Moderator: jmelson@... timg@... [Moderator]
URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
bill,
List Manager
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
Discussion Thread
nielsenbe@a...
2001-08-27 22:41:49 UTC
linear encoder to control rotary indexer??
Ray
2001-08-28 06:46:33 UTC
Re: linear encoder to control rotary indexer??
dougrasmussen@c...
2001-08-28 07:33:12 UTC
Re: linear encoder to control rotary indexer??
Jon Elson
2001-08-28 11:18:14 UTC
Re: [CAD_CAM_EDM_DRO] linear encoder to control rotary indexer??
nielsenbe@a...
2001-08-28 21:24:39 UTC
Re: [CAD_CAM_EDM_DRO] linear encoder to control rotary indexer??
Smoke
2001-08-29 08:09:29 UTC
Re: [CAD_CAM_EDM_DRO] linear encoder to control rotary indexer??
info.host@b...
2001-08-29 08:36:10 UTC
Re: [CAD_CAM_EDM_DRO] linear encoder to control rotary indexer??
Gail & Bryan Harries
2001-08-29 08:47:31 UTC
RE: [CAD_CAM_EDM_DRO] linear encoder to control rotary indexer??
info.host@b...
2001-08-29 09:23:58 UTC
Re: [CAD_CAM_EDM_DRO] linear encoder to control rotary indexer??
Jon Elson
2001-08-29 09:34:05 UTC
Re: [CAD_CAM_EDM_DRO] linear encoder to control rotary indexer??
dougrasmussen@c...
2001-08-29 12:13:40 UTC
Re: linear encoder to control rotary indexer??
Carey L. Culpepper
2001-08-29 12:42:54 UTC
Re: [CAD_CAM_EDM_DRO] linear encoder to control rotary indexer??
Carey L. Culpepper
2001-08-29 13:24:57 UTC
Re: [CAD_CAM_EDM_DRO] linear encoder to control rotary indexer??
nielsenbe@a...
2001-08-29 14:01:05 UTC
Re: [CAD_CAM_EDM_DRO] linear encoder to control rotary indexer??
nielsenbe@a...
2001-08-29 14:07:57 UTC
Re: [CAD_CAM_EDM_DRO] linear encoder to control rotary indexer??