Re: [CAD_CAM_EDM_DRO] SPINDLE
Posted by
info.host@b...
on 2001-08-31 11:27:28 UTC
> No, this won't work. it will reduce the idling speed of the router, butit
> willregulators
> also cut the torque to nil. A Variac will work fairly well, as it keeps
> constant
> voltage under load. I think some of the router companies sell speed
> that the router plugs into.Ahhhh, I actually put variac in my reply and then deleted thinking something
was wrong with it. Now I see why. I need to think a bit more. :)
> Optical tachs won't work too well, either, as the dust will blind thephotocell
> in a minute or two.I know car garages sell contact rpm meters, I don't think they would go to
30,000 rpm, you'd have to make a little gear for it to (I think the one I
saw was 15k rpm, 2:1). Besides, you should have a dust extractor hooked up
to that router, you don't want MDF dust everywhere with all the worries
about it being carcinogenic.
Thanks,
John Heritage
Discussion Thread
dlantz@a...
2001-08-31 05:57:58 UTC
SPINDLE
info.host@b...
2001-08-31 06:17:09 UTC
Re: [CAD_CAM_EDM_DRO] SPINDLE
Jon Elson
2001-08-31 11:03:24 UTC
Re: [CAD_CAM_EDM_DRO] SPINDLE
Jon Elson
2001-08-31 11:07:03 UTC
Re: [CAD_CAM_EDM_DRO] SPINDLE
dlantz@a...
2001-08-31 11:12:06 UTC
RE: [CAD_CAM_EDM_DRO] SPINDLE
dlantz@a...
2001-08-31 11:16:11 UTC
RE: [CAD_CAM_EDM_DRO] SPINDLE
info.host@b...
2001-08-31 11:27:28 UTC
Re: [CAD_CAM_EDM_DRO] SPINDLE
dlantz@a...
2001-08-31 11:40:32 UTC
RE: [CAD_CAM_EDM_DRO] SPINDLE
wanliker@a...
2001-08-31 14:51:24 UTC
Re: [CAD_CAM_EDM_DRO] SPINDLE
cadcamcenter@y...
2001-08-31 15:17:19 UTC
Re: SPINDLE
cadcamcenter@y...
2001-08-31 15:45:25 UTC
Re: SPINDLE
Jon Elson
2001-08-31 20:10:18 UTC
Re: [CAD_CAM_EDM_DRO] SPINDLE
Jon Elson
2001-08-31 20:21:51 UTC
Re: [CAD_CAM_EDM_DRO] Re: SPINDLE
info.host@b...
2001-09-01 11:59:03 UTC
Re: [CAD_CAM_EDM_DRO] Re: SPINDLE
M. SHABBIR
2001-09-01 20:25:26 UTC
RE: [CAD_CAM_EDM_DRO] SPINDLE
dlantz@a...
2001-09-04 05:27:38 UTC
RE: [CAD_CAM_EDM_DRO] SPINDLE