Re: [CAD_CAM_EDM_DRO] Re: CNCpro Parallel port problem

I had problems with port selection on the IBM ThinkPads too, with supercam,
when I was setting it up for a customer. I'll bet that is your problem, if
you haven't already confirmed that.

Tom Eldredge

----- Original Message -----
From: <cnc002@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Tuesday, August 28, 2001 10:17 AM
Subject: Re: [CAD_CAM_EDM_DRO] Re: CNCpro Parallel port problem


> Don:
>
> I must have missed the part about you using an IBM ThinkPad. The problems
> with the parallel port on them is why I don't use one myself. I had 2 of
> them and found out the same thing, it is a pain to use anything except a
> printer on them. Even when setting the port to unidirectional on the 2 I
had
> they would not read a security key for my Licom CAD/CAM program, but it
> worked on every other computer I used. This well may be your problem.
>
> Regards,
>
> Randy Abernathy
> 4626 Old Stilesboro Road NW
> Acworth, GA 30101-4066
> Phone/Fax: 770-974-5295
> E-mail: cnc002@...
> We service, install and repair industrial woodworking machinery,
> specializing in SCM / SCMI machinery
>
>
> [Non-text portions of this message have been removed]
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
> Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Manager
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>