Re: [CAD_CAM_EDM_DRO] Re: New guy with questions

We learned to make them at school using oil hardening tool steel.
Us gunsmiths sometimes have to use oddball thread sizes to make screws to
fit antique or obsolete guns. I t might be interesting to make one using
CNC machining. Should be all that hard to do.

Smoke

> > Making dies from nuts is not a good idea. However, dies aren't really

all

> > that hard to make.
>
> Are the cutting surfaces not high carbon steel or carbide?
>
> John H.
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
> Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Manager
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>