Re: [CAD_CAM_EDM_DRO] TurboCNC and general computer questions
Posted by
Craig Chamberlin
on 2001-10-15 16:30:21 UTC
Dan,
Correction...the wrong lpt's will hang...you need to press Ctrl-Break
and then continue. Been a while:)
Craig
Dan Statman wrote:
Correction...the wrong lpt's will hang...you need to press Ctrl-Break
and then continue. Been a while:)
Craig
Dan Statman wrote:
>
> I am running TurboCNC to control my CNC milling machine and i have just
> received a surplus computer to dedicate to the machine shop. I got the
> computer for $23 off of eBay, so I don't necessarily expect great things
> from it. It is a Pentium 1 machine running Windows 95 with 16 megs of RAM.
>
> When I hook up the parrallel port and connect to TurboCNC from a DOS shell
> within Windows, I can jog the axes and run G-Code programs (although the
> performance sucks since Windows is using resources). When I exit Windows
> and restart in DOS mode then the TurboCNC program acts just like it is
> working except the stepper motors do not move.
>
> The configuration file is the same as when it was running from a Dos shell
> under Windows.
>
> Any ideas why this would happen?? What should I look for?
>
> I am not a Dos/Windows expert in any way, shape, or form so use small words,
> ;-)
>
> Thank you for any help,
>
> Daniel J. Statman, Statman Designs
> www.statmandesigns.com
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
> Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Manager
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
Discussion Thread
Dan Statman
2001-10-15 14:35:50 UTC
TurboCNC and general computer questions
David Goodfellow
2001-10-15 15:46:20 UTC
Re: [CAD_CAM_EDM_DRO] TurboCNC and general computer questions
Craig Chamberlin
2001-10-15 16:30:21 UTC
Re: [CAD_CAM_EDM_DRO] TurboCNC and general computer questions
David Goodfellow
2001-10-15 16:40:29 UTC
Re: [CAD_CAM_EDM_DRO] TurboCNC and general computer questions
shymu@b...
2001-10-15 16:41:22 UTC
Re: TurboCNC and general computer questions
shymu@b...
2001-10-15 17:06:11 UTC
Re: TurboCNC and general computer questions
Craig Chamberlin
2001-10-15 17:15:24 UTC
Re: [CAD_CAM_EDM_DRO] TurboCNC and general computer questions
Dan Statman
2001-10-15 17:30:13 UTC
Re: [CAD_CAM_EDM_DRO] TurboCNC and general computer questions
shymu@b...
2001-10-15 17:48:13 UTC
Re: TurboCNC and general computer questions
shymu@b...
2001-10-15 17:59:14 UTC
Re: TurboCNC and general computer questions
Art Fenerty
2001-10-15 18:06:24 UTC
Re: [CAD_CAM_EDM_DRO] TurboCNC and general computer questions
Dale Smith
2001-10-15 18:36:51 UTC
Re: [CAD_CAM_EDM_DRO] TurboCNC and general computer questions
Carol & Jerry Jankura
2001-10-15 19:37:52 UTC
RE: [CAD_CAM_EDM_DRO] TurboCNC and general computer questions