Re: [CAD_CAM_EDM_DRO] 2.5 axis vs. 3 axis

Rob,

My understanding of 2.5 axis would be 2 axis with different depths, but only
one depth at a time.

3 axis is when you are doing something like V carved letters (3D engraving)
where all three axis can be moving at the same time.

Bob Campbell

----- Original Message -----
From: "Rob" <robv@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Thursday, October 25, 2001 3:35 PM
Subject: [CAD_CAM_EDM_DRO] 2.5 axis vs. 3 axis


> What's the difference?
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
> Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Manager
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>