CAD CAM EDM DRO - Yahoo Group Archive

RE: [CAD_CAM_EDM_DRO] Re: Plasma Cutting Software?

Posted by Chris Clough
on 2001-11-27 08:19:01 UTC
Bob,
Ahh, I love to hear those words - FREE! :)
-Chris

-----Original Message-----
From: cncdxf@... [mailto:cncdxf@...]
Sent: Tuesday, November 27, 2001 10:15 AM
To: CAD_CAM_EDM_DRO@yahoogroups.com
Subject: [CAD_CAM_EDM_DRO] Re: Plasma Cutting Software?

Chris,
Use the FREE version of TurboCad. Use the FREE ACE converter
from Yeager....or use KellyCam till it times out.

Bob


--- In CAD_CAM_EDM_DRO@y..., "Chris Clough" <cclough@x> wrote:
> Ok - I'll have some picts up of the finished table this weekend
sometime
> - I've got some steppers and gears on the way so...
>
> What I'm wondering is this - what can I use software wise to create
> drawings for plasma cutouts. I have TurboCNC (yes, I'm cheap like
that,
> but this software is great!) and need something to actually do the
> drawings in. What software should I obtain to effectively do this?
>
> Thanks,
> -Chris Clough
> Xtech Engineering


Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/

Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
Moderator: jmelson@... timg@... [Moderator]
URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
bill,
List Manager



Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/

Discussion Thread

machines@n... 2001-11-26 13:06:25 UTC Calculations for XL 037 pullies and cutters Alan Marconett KM6VV 2001-11-26 14:44:17 UTC Re: [CAD_CAM_EDM_DRO] Calculations for XL 037 pullies and cutters machines@n... 2001-11-26 15:04:16 UTC Re: Calculations for XL 037 pullies and cutters phrh@w... 2001-11-26 15:18:12 UTC Re: Calculations for XL 037 pullies and cutters Chris Clough 2001-11-26 15:29:27 UTC Plasma control Darrell Daniels 2001-11-26 17:30:26 UTC Re: [CAD_CAM_EDM_DRO] Plasma control Alan Marconett KM6VV 2001-11-26 18:50:37 UTC Re: [CAD_CAM_EDM_DRO] Calculations for XL 037 pullies and cutters Steve Smith 2001-11-26 20:50:16 UTC Re: [CAD_CAM_EDM_DRO] Plasma control Chris Clough 2001-11-26 21:30:15 UTC Plasma Cutting Software? cncdxf@a... 2001-11-27 08:15:42 UTC Re: Plasma Cutting Software? Chris Clough 2001-11-27 08:19:01 UTC RE: [CAD_CAM_EDM_DRO] Re: Plasma Cutting Software? roundrocktom@y... 2001-11-27 09:15:24 UTC Re: Plasma control Carol & Jerry Jankura 2001-11-27 14:04:00 UTC RE: [CAD_CAM_EDM_DRO] Plasma Cutting Software?