CAD CAM EDM DRO - Yahoo Group Archive

RE: [CAD_CAM_EDM_DRO] tach output

Posted by Tim
on 2001-12-17 16:50:24 UTC
Sure as long as the drive you are using doesn't need tach input (Like
the G3X0 drives).

Tim
[Denver, CO]

> -----Original Message-----
>
>
> Hi all,
> Can you use servo motors without the tach drive hooked up.
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/

Discussion Thread

jakefife 2001-12-17 16:40:34 UTC tach output Tim 2001-12-17 16:50:24 UTC RE: [CAD_CAM_EDM_DRO] tach output ccs@m... 2001-12-17 16:58:40 UTC Re: [CAD_CAM_EDM_DRO] tach output Jon Elson 2001-12-17 22:53:13 UTC Re: [CAD_CAM_EDM_DRO] tach output jakefife 2001-12-18 17:38:16 UTC Re: tach output Jon Elson 2001-12-18 22:58:37 UTC Re: [CAD_CAM_EDM_DRO] Re: tach output Ray 2001-12-19 07:16:52 UTC Re: Re: tach output jakefife 2001-12-19 19:15:21 UTC Re: tach output Thanks for the help David Micklethwaite 2001-12-20 13:14:23 UTC Re: [CAD_CAM_EDM_DRO] Re: tach output Tim 2001-12-20 13:35:48 UTC RE: [CAD_CAM_EDM_DRO] Re: tach output mariss92705 2001-12-20 13:57:37 UTC Re: tach output Jon Elson 2001-12-20 22:57:01 UTC Re: [CAD_CAM_EDM_DRO] Re: tach output Jon Elson 2001-12-20 23:11:34 UTC Re: [CAD_CAM_EDM_DRO] Re: tach output mariss92705 2001-12-20 23:27:02 UTC Re: tach output rainnea 2001-12-21 03:34:31 UTC Re: tach output Tim Goldstein 2001-12-21 07:09:02 UTC Re: [CAD_CAM_EDM_DRO] Re: tach output Paul 2001-12-21 13:22:34 UTC Re: [CAD_CAM_EDM_DRO] Re: tach output rainnea 2001-12-21 17:01:44 UTC Re: tach output Jon Elson 2001-12-21 23:24:12 UTC Re: [CAD_CAM_EDM_DRO] Re: tach output Jon Elson 2001-12-21 23:32:37 UTC Re: [CAD_CAM_EDM_DRO] Re: tach output