Re: [CAD_CAM_EDM_DRO] Re: tach output
Posted by
Paul
on 2001-12-21 13:22:34 UTC
Hi Rab
Short of using a Servo To Go card, probably the cheapest solution would be a
pair of the Kaluga DRO cards from Dan Mauch.
Software is the hard one to answer as it depends on your OS and the final
task. I would recommend a modified EMC driver (but I'm biased)..
Regards, Paul.
Short of using a Servo To Go card, probably the cheapest solution would be a
pair of the Kaluga DRO cards from Dan Mauch.
Software is the hard one to answer as it depends on your OS and the final
task. I would recommend a modified EMC driver (but I'm biased)..
Regards, Paul.
On Friday 21 December 2001 11:34 am, rainnea wrote:
> Can anyone recommend a good, reasonably priced method of reading the
> encoder signals of 5 or 6 axes into a PC, what's required for an
> interface and software ?
Discussion Thread
jakefife
2001-12-17 16:40:34 UTC
tach output
Tim
2001-12-17 16:50:24 UTC
RE: [CAD_CAM_EDM_DRO] tach output
ccs@m...
2001-12-17 16:58:40 UTC
Re: [CAD_CAM_EDM_DRO] tach output
Jon Elson
2001-12-17 22:53:13 UTC
Re: [CAD_CAM_EDM_DRO] tach output
jakefife
2001-12-18 17:38:16 UTC
Re: tach output
Jon Elson
2001-12-18 22:58:37 UTC
Re: [CAD_CAM_EDM_DRO] Re: tach output
Ray
2001-12-19 07:16:52 UTC
Re: Re: tach output
jakefife
2001-12-19 19:15:21 UTC
Re: tach output Thanks for the help
David Micklethwaite
2001-12-20 13:14:23 UTC
Re: [CAD_CAM_EDM_DRO] Re: tach output
Tim
2001-12-20 13:35:48 UTC
RE: [CAD_CAM_EDM_DRO] Re: tach output
mariss92705
2001-12-20 13:57:37 UTC
Re: tach output
Jon Elson
2001-12-20 22:57:01 UTC
Re: [CAD_CAM_EDM_DRO] Re: tach output
Jon Elson
2001-12-20 23:11:34 UTC
Re: [CAD_CAM_EDM_DRO] Re: tach output
mariss92705
2001-12-20 23:27:02 UTC
Re: tach output
rainnea
2001-12-21 03:34:31 UTC
Re: tach output
Tim Goldstein
2001-12-21 07:09:02 UTC
Re: [CAD_CAM_EDM_DRO] Re: tach output
Paul
2001-12-21 13:22:34 UTC
Re: [CAD_CAM_EDM_DRO] Re: tach output
rainnea
2001-12-21 17:01:44 UTC
Re: tach output
Jon Elson
2001-12-21 23:24:12 UTC
Re: [CAD_CAM_EDM_DRO] Re: tach output
Jon Elson
2001-12-21 23:32:37 UTC
Re: [CAD_CAM_EDM_DRO] Re: tach output