CAD CAM EDM DRO - Yahoo Group Archive

Re: tach output

Posted by rainnea
on 2001-12-21 03:34:31 UTC
>
> (1) You can always take the encoder signals back to the PC as well.
> The drive uses the encoder to run the motor but that does not mean
> you can't send them to the PC as well as a DRO input. You have the
> encoder anyway, why not use it if the PC is set up to take the
> inputs? It would give a reading even if the drive faults.
>

Can anyone recommend a good, reasonably priced method of reading the
encoder signals of 5 or 6 axes into a PC, what's required for an
interface and software ?

Rab,
Rainnea Graphics

Discussion Thread

jakefife 2001-12-17 16:40:34 UTC tach output Tim 2001-12-17 16:50:24 UTC RE: [CAD_CAM_EDM_DRO] tach output ccs@m... 2001-12-17 16:58:40 UTC Re: [CAD_CAM_EDM_DRO] tach output Jon Elson 2001-12-17 22:53:13 UTC Re: [CAD_CAM_EDM_DRO] tach output jakefife 2001-12-18 17:38:16 UTC Re: tach output Jon Elson 2001-12-18 22:58:37 UTC Re: [CAD_CAM_EDM_DRO] Re: tach output Ray 2001-12-19 07:16:52 UTC Re: Re: tach output jakefife 2001-12-19 19:15:21 UTC Re: tach output Thanks for the help David Micklethwaite 2001-12-20 13:14:23 UTC Re: [CAD_CAM_EDM_DRO] Re: tach output Tim 2001-12-20 13:35:48 UTC RE: [CAD_CAM_EDM_DRO] Re: tach output mariss92705 2001-12-20 13:57:37 UTC Re: tach output Jon Elson 2001-12-20 22:57:01 UTC Re: [CAD_CAM_EDM_DRO] Re: tach output Jon Elson 2001-12-20 23:11:34 UTC Re: [CAD_CAM_EDM_DRO] Re: tach output mariss92705 2001-12-20 23:27:02 UTC Re: tach output rainnea 2001-12-21 03:34:31 UTC Re: tach output Tim Goldstein 2001-12-21 07:09:02 UTC Re: [CAD_CAM_EDM_DRO] Re: tach output Paul 2001-12-21 13:22:34 UTC Re: [CAD_CAM_EDM_DRO] Re: tach output rainnea 2001-12-21 17:01:44 UTC Re: tach output Jon Elson 2001-12-21 23:24:12 UTC Re: [CAD_CAM_EDM_DRO] Re: tach output Jon Elson 2001-12-21 23:32:37 UTC Re: [CAD_CAM_EDM_DRO] Re: tach output