Re: [CAD_CAM_EDM_DRO] Cheap place for new servos.
Posted by
Jon Elson
on 2001-12-23 23:37:24 UTC
John Schwab wrote:
A 2-wire DC brushless motor is not generally usable, as it is not
reversible. Don't get gearhead motors, as they introduce backlash
(except for highly exotic motors). Gecko servo drives are for brush motors.
Check outfits like Herbach & Rademan, C&H sales, Surplus Center,
and such.
Jon
> I just oderer a shoptask and am looking into a servo CNC system. I haveMost of the low-cost servo amps are for BRUSH motors, not brushless.
> found many suppliers of servos but they all appear to be $500+ Am I looking
> at the wrong types, most of you probably know what to get but to confirm
> what i'm looking for is here:
>
> Nema 34 Frame
> DC Brushless
> 1000+ CPR integrated encoder
> 24-90VDC
> 4x Gearhead or not?
> and hopefully the most Torque I can get for the price.
>
> Where have others looked for there servos, non surplus? Unless it's
> impossible to get a new servo like this for less than $200? Ignore the rest
> of the system, i've been following the thread and Gekko is the way to go.
> Thank for any help.
A 2-wire DC brushless motor is not generally usable, as it is not
reversible. Don't get gearhead motors, as they introduce backlash
(except for highly exotic motors). Gecko servo drives are for brush motors.
Check outfits like Herbach & Rademan, C&H sales, Surplus Center,
and such.
Jon
Discussion Thread
John Schwab
2001-12-23 04:54:46 UTC
Cheap place for new servos.
Tim Goldstein
2001-12-23 07:05:30 UTC
Re: [CAD_CAM_EDM_DRO] Cheap place for new servos.
Scot Rogers
2001-12-23 09:01:02 UTC
RE: [CAD_CAM_EDM_DRO] Cheap place for new servos.
Jon Elson
2001-12-23 23:37:24 UTC
Re: [CAD_CAM_EDM_DRO] Cheap place for new servos.
John Schwab
2001-12-23 23:42:16 UTC
Re: [CAD_CAM_EDM_DRO] Cheap place for new servos.
Tim Goldstein
2001-12-24 07:58:07 UTC
RE: [CAD_CAM_EDM_DRO] Cheap place for new servos.
chewy8833
2001-12-24 08:22:23 UTC
Re: Cheap place for new servos.
John Schwab
2001-12-24 18:44:14 UTC
Re: [CAD_CAM_EDM_DRO] Cheap place for new servos.
Tim Goldstein
2001-12-24 18:54:29 UTC
RE: [CAD_CAM_EDM_DRO] Cheap place for new servos.
Tim Goldstein
2001-12-24 18:54:29 UTC
EMC BDI 2.11 changes?
Jon Elson
2001-12-24 23:12:06 UTC
Re: [CAD_CAM_EDM_DRO] Cheap place for new servos.
ballendo
2001-12-25 03:00:04 UTC
say no to Motion industries was Re: Cheap place for new servos.
Paul
2001-12-25 04:03:24 UTC
Re: [CAD_CAM_EDM_DRO] EMC BDI 2.11 changes?
Matthew King
2001-12-25 05:42:09 UTC
Re: [CAD_CAM_EDM_DRO] say no to Motion industries was Re: Cheap place for new servos.
Les Watts
2001-12-25 06:36:49 UTC
Re: [CAD_CAM_EDM_DRO] say no to Motion industries was Re: Cheap place for new servos.
ballendo
2001-12-25 07:20:31 UTC
say no to Motion industries was Re: Cheap place for new servos.
Tim Goldstein
2001-12-25 08:57:23 UTC
RE: [CAD_CAM_EDM_DRO] EMC BDI 2.11 changes?
Paul
2001-12-25 13:58:30 UTC
Re: [CAD_CAM_EDM_DRO] EMC BDI 2.11 changes?