CAD CAM EDM DRO - Yahoo Group Archive

Re: Cheap place for new servos.

Posted by chewy8833
on 2001-12-24 08:22:23 UTC
--- In CAD_CAM_EDM_DRO@y..., Jon Elson <elson@p...> wrote:
> John Schwab wrote:
>
> > I just oderer a shoptask and am looking into a servo CNC system.
I have
> > found many suppliers of servos but they all appear to be $500+ Am
I looking
> > at the wrong types, most of you probably know what to get but to
confirm
> > what i'm looking for is here:
> >
> > Nema 34 Frame
> > DC Brushless
> > 1000+ CPR integrated encoder
> > 24-90VDC
> > 4x Gearhead or not?
> > and hopefully the most Torque I can get for the price.
> >
> > Where have others looked for there servos, non surplus? Unless
it's
> > impossible to get a new servo like this for less than $200?
Ignore the rest
> > of the system, i've been following the thread and Gekko is the way
to go.
> > Thank for any help.
>
> Most of the low-cost servo amps are for BRUSH motors, not brushless.
> A 2-wire DC brushless motor is not generally usable, as it is not
> reversible. Don't get gearhead motors, as they introduce backlash
> (except for highly exotic motors). Gecko servo drives are for brush
motors.
>
> Check outfits like Herbach & Rademan, C&H sales, Surplus Center,
> and such.
>
> Jon

Worth a look ?
http://www.aaaim.com/cgi-local/shop991/shop.pl/SID=14213756265/page=DC
ME.htm#DCME9450. If this link shows up short add the rest.

Discussion Thread

John Schwab 2001-12-23 04:54:46 UTC Cheap place for new servos. Tim Goldstein 2001-12-23 07:05:30 UTC Re: [CAD_CAM_EDM_DRO] Cheap place for new servos. Scot Rogers 2001-12-23 09:01:02 UTC RE: [CAD_CAM_EDM_DRO] Cheap place for new servos. Jon Elson 2001-12-23 23:37:24 UTC Re: [CAD_CAM_EDM_DRO] Cheap place for new servos. John Schwab 2001-12-23 23:42:16 UTC Re: [CAD_CAM_EDM_DRO] Cheap place for new servos. Tim Goldstein 2001-12-24 07:58:07 UTC RE: [CAD_CAM_EDM_DRO] Cheap place for new servos. chewy8833 2001-12-24 08:22:23 UTC Re: Cheap place for new servos. John Schwab 2001-12-24 18:44:14 UTC Re: [CAD_CAM_EDM_DRO] Cheap place for new servos. Tim Goldstein 2001-12-24 18:54:29 UTC RE: [CAD_CAM_EDM_DRO] Cheap place for new servos. Tim Goldstein 2001-12-24 18:54:29 UTC EMC BDI 2.11 changes? Jon Elson 2001-12-24 23:12:06 UTC Re: [CAD_CAM_EDM_DRO] Cheap place for new servos. ballendo 2001-12-25 03:00:04 UTC say no to Motion industries was Re: Cheap place for new servos. Paul 2001-12-25 04:03:24 UTC Re: [CAD_CAM_EDM_DRO] EMC BDI 2.11 changes? Matthew King 2001-12-25 05:42:09 UTC Re: [CAD_CAM_EDM_DRO] say no to Motion industries was Re: Cheap place for new servos. Les Watts 2001-12-25 06:36:49 UTC Re: [CAD_CAM_EDM_DRO] say no to Motion industries was Re: Cheap place for new servos. ballendo 2001-12-25 07:20:31 UTC say no to Motion industries was Re: Cheap place for new servos. Tim Goldstein 2001-12-25 08:57:23 UTC RE: [CAD_CAM_EDM_DRO] EMC BDI 2.11 changes? Paul 2001-12-25 13:58:30 UTC Re: [CAD_CAM_EDM_DRO] EMC BDI 2.11 changes?