Re: [CAD_CAM_EDM_DRO] say no to Motion industries was Re: Cheap place for new servos.

Question - who else is worth dealing with on bearings and such? MI, locally,
is the cheapest on my Timken headstock bearings. Granted they have to get
them from Birmingham, but they'll be here the next day. They do make me pay
in advance, however... Anyhow, the Bearings and Drives office here was 15%
MORE than Motion Industries. The NAPA store, for BCA cross-referenced
bearings was 25% MORE than MI. Any web outfits that have a FULL range of
bearings and seals?

Thanks,

Matt King
Columbus, GA

-----Original Message-----
From: ballendo <ballendo@...>
To: CAD_CAM_EDM_DRO@yahoogroups.com <CAD_CAM_EDM_DRO@yahoogroups.com>
Date: Tuesday, December 25, 2001 6:00 AM
Subject: [CAD_CAM_EDM_DRO] say no to Motion industries was Re: Cheap place
for new servos.

>Tim,
>
>I'll have to second this Motion Industries complaint. over the years
>I have tried to deal with several different MI offices, with the idea
>that my "most local" was just a bad example. Not true! In every
>transaction I have ever had with MI, there has been a bad taste of
>some sort; from pricing, to counter help, to back orders,etc.
>
>Just say no.
>
>Ballendo
>
>--- In CAD_CAM_EDM_DRO@y..., "Tim Goldstein" <timg@k...> wrote:
><snip>I have avoided local sources
>> after getting raped by Motion Industries local office.
>>
>> Tim
>> [Denver, CO]
>
>
>
>Addresses:
>FAQ: http://www.ktmarketing.com/faq.html
>FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
>Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
>Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
>Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
>List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
>Moderator: jmelson@... timg@... [Moderator]
>URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>bill,
>List Manager
>
>
>
>Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>