Re: [CAD_CAM_EDM_DRO] Re: Vanguard 3000 engraver retrofit

Why can't I find the beginning of this thread ?

I spent lots of time behind NewHermes Vangaurd machines. Spent time with
Machines from Western too !

Maybe I could help if I knew more about the beginning of this thread.

Chris L

ballendo wrote:

> Darrell,
>
> Retro-fitting these older engravers is a "staple" for several
> companies in the engraving industry. Western engravers(Vision) and
> others can be found linked to the A&E (Awards and Engraving)trade
> magazine site/show listings. I don't have a url;try a search. There
> is a good company in L.A., CA, called Three-E-C or some such, who can
> help. Also a S/W co. in LA (Louisiana) that starts with X...
>
> Sorry, but it has been awhile since my memory needed these.
>
> Hope this helps.
>
> Ballendo
>
> P.S. I did two of these by snipping the traces on the driver board,
> and "inserting" the S/D signals from the p-port.(The issue back then
> was the ridiculous cost of fonts, and their proprietary nature.)
> But, if I were doing it today, I'd just throw the control box away
> and wire the motors to a new driver system (assuming the old control
> was unacceptable to use; which in your case seems to be true, at
> least for YOUR goals)
>
> --- In CAD_CAM_EDM_DRO@y..., Darrell Daniels <ddaniel1@s...> wrote:
> > Hi, I was going to build a CNC router from surplus parts as a
> learning
> > project for the CNC hobby but I've inherited a fully functional
> Vanguard
> > 3000 engraver manufactured by New Hermes <snip>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
> Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Manager
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/