Re: ATX Power supply soft power switch hack...Anyone done it?

I had already tried this trick, it starts the power spply p, the cp
fan even comes on, bt the compter still dosent boot. I even checked
all the bios wake and power management settings and didnt find any
that make it work the way i want.

Thanks for the reply.

Bill

--- In CAD_CAM_EDM_DRO@y..., "fast1994gto" <beking@h...> wrote:
> Pin 14 of the ATX power connector (green wire) is the remote power
> supply turn-on line. Bringing it to ground (any black wire) will
> enable to power supply. The ATX power supply will not start with
pin
> 14 floating.
>
>
> Barry
>
> --- In CAD_CAM_EDM_DRO@y..., "bilg63475" <bill@g...> wrote:
> > I am trying to use a ATX computer with amd 900 athalon chip in a
> > machine and would like to simply power the computer up by
switching
> > the ac line.
> >
> > This machine has a main power switch on the back of the power
> supply
> > which turns off all the power but when switched on, you still
have
> to
> > use the soft power switch ( a spst momentary push button ) to
boot
> > the machine and to shut it down.
> >
> > Jumpering this switch does not make it power on when the line is
> > switched and there are no bios settings which enable this feature
> > either.
> >
> > Has anyone else dealt with this problem?
> >
> > Thanks
> >
> > Bill