Re: [CAD_CAM_EDM_DRO] Drilling with Vector

----- Original Message -----
From: Carol & Jerry Jankura <jerry.jankura@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Sunday, January 13, 2002 2:50 PM
Subject: RE: [CAD_CAM_EDM_DRO] Drilling with Vector


<snip
> A couple of things that I've learned:
>
> 1. Plot the center point of each hole that you want drilled
> 2. Select only the centers (not the holes themselves)
> 3. Generate your G-Code You'll note that Vector 9.3 will generate a bunch
of
> G-81 codes.
> 4. You'll then have to edit the G-Code file to specify the Z and R values,
> also the FeedRate.
>
> Hope this helps you out.
>
> -- Carol & Jerry Jankura
> Strongsville, Ohio
> So many toys, so little time....