Re: [CAD_CAM_EDM_DRO] Re: Drilling with Vector

Putting the points at the bottom of the holes sounds like the easiest way to
me Al. Sure beats drawing extra lines if you don't need them.

Smoke

> I also use Vector . I just put points where I want to drill the holes,
> either at the depth I want the hole to go to or all at z=0 and then cut

and

> paste them to the desired depth. After inserting NC select Cycle and
> select the G83 peck cycle. Highlight the drawing window and generate the
> NC. A macro then asks for the clearance plane, peck depth and
> feedrate. Seems to work for me, don't know if this is the best or only

way

> of doing it.
>
> Al