RE: [CAD_CAM_EDM_DRO] CAM Software

Chris,

I use AlphaCam, but I do not have a 4th axis machine.

I am currently in the process of building a 4th axis machine. I will be
using the new 4th axis software that David at Rams Software is developing.
It should be available sometime in March. I will be using Rhino for my 3D
designs.

The new software will support a true 4th axis machine. This means that you
will be able to use all four axis.

For more details, check with David Ford at www.rams3d.com.

Bob Campbell

-----Original Message-----
From: Chris Clough [mailto:cclough@...]
Sent: Thursday, February 28, 2002 1:06 PM
To: CAD_CAM_EDM_DRO@yahoogroups.com
Subject: [CAD_CAM_EDM_DRO] CAM Software


Hi group,

Wondering what everyone out there is presently using for CAM software.
I've been messing with Surfcam, CAMWorks, ProCAM, GeoPath, MasterCAM,
and Dolphin... just wondering what others have had luck with. Need a 4th
axis milling solution.

Thanks,
-Chris Clough

Xtech Engineering
http://www.xtecheng.com/
info@...
Ph# 866-55-XTECH


Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/

OFF Topic POSTS: General Machining
http://www.metalworking.com/news_servers.html
http://www.metalworking.com/news_servers.html

Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
Moderator: jmelson@... timg@... [Moderator]
URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
bill,
List Mom
List Owner



Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/