Re: [CAD_CAM_EDM_DRO] Re: 5-axis Taig Mill
Posted by
Scott A. Stephens
on 2002-01-20 15:04:02 UTC
I don't know if this will help....But I hear on the MaxNC group the the
MaxNC has an air spindle....It's not in the catalog but since the MaxNC and
the Taig both use the same spindle assemble...It might be easier to adapt
to your use. Hope this helps.
At 01:44 PM 1/20/2002 +0000, you wrote:
MaxNC has an air spindle....It's not in the catalog but since the MaxNC and
the Taig both use the same spindle assemble...It might be easier to adapt
to your use. Hope this helps.
At 01:44 PM 1/20/2002 +0000, you wrote:
>The work envelope is only a few inches at extreme angles because the
>tool tip is about 3 inches away from the center of rotation of the
>5th axis, if I was to mount the spindle so that the tool tip was at
>the centre of rotation and put a spacer block between the Z-axis
>support and the mill body to make up for the thickness of the
>Sherline rotary table then the work envelop would be that of a normal
>4-axis Taig mill at shallow angles and be limited to the spindle
>hitting the 4th-axis headstock and tailstock as the 5th axis angle
>increases.
>
>Still trying to work out the best choice for a compact spindle and am
>looking at a 21,000rpm 90-degree die grinder made by Chicago
>Pneumatic, picture and specs at link below:
>http://www.thetoolwarehouse.net/shop/product2261.html
>
>The size and weight of this may allow mounting 2 or 3 of them on the
>5th axis for auto-toolchanging at the cost of some of the work
>envelope.
>
>I'd really like to hear from anyone with experience with this or a
>similar tool in a CNC application.
>
>Rab
>
>
>--- In CAD_CAM_EDM_DRO@y..., "Scott A. Stephens"
><sstephenssprint020@e...> wrote:
> > Looks nice. What is the new work envelope???
>
>
>Addresses:
>FAQ: http://www.ktmarketing.com/faq.html
>FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
>Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
>Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
>Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
>List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
>Moderator: jmelson@... timg@... [Moderator]
>URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>bill,
>List Manager
>
>
>
>Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
Discussion Thread
rainnea
2002-01-18 15:09:32 UTC
5-axis Taig Mill
Scott A. Stephens
2002-01-19 21:10:14 UTC
Re: [CAD_CAM_EDM_DRO] 5-axis Taig Mill
rainnea
2002-01-20 05:44:55 UTC
Re: 5-axis Taig Mill
Scott A. Stephens
2002-01-20 15:04:02 UTC
Re: [CAD_CAM_EDM_DRO] Re: 5-axis Taig Mill
Tony Jeffree
2002-01-21 07:28:55 UTC
Re: 5-axis Taig Mill
Michael Milligan
2002-01-21 08:29:56 UTC
RE: [CAD_CAM_EDM_DRO] Re: 5-axis Taig Mill
Andrew Werby
2002-01-21 11:27:40 UTC
Re: 5-axis Taig Mill
rainnea
2002-01-21 14:11:25 UTC
Re: 5-axis Taig Mill
Alan Marconett KM6VV
2002-01-21 15:47:33 UTC
Re: 5-axis Taig Mill
rainnea
2002-01-21 18:12:33 UTC
Re: 5-axis Taig Mill
Alan Marconett KM6VV
2002-01-21 18:43:25 UTC
Re: 5-axis Taig Mill
rainnea
2002-01-22 00:50:10 UTC
Re: 5-axis Taig Mill
ballendo
2002-01-22 07:32:24 UTC
Re: 5-axis Taig Mill
Alan Marconett KM6VV
2002-01-22 10:31:52 UTC
Re: 5-axis Taig Mill
Tom Benedict
2002-02-28 07:17:14 UTC
VectorCam Demo and EMC - Lathe
Tom Benedict
2002-02-28 08:15:26 UTC
Re: VectorCam Demo and EMC - Lathe
Matt Shaver
2002-02-28 09:14:56 UTC
Re: [CAD_CAM_EDM_DRO] VectorCam Demo and EMC - Lathe
Scot Rogers
2002-02-28 09:25:33 UTC
RE: [CAD_CAM_EDM_DRO] VectorCam Demo and EMC - Lathe
Jon Elson
2002-02-28 11:02:18 UTC
Re: [CAD_CAM_EDM_DRO] VectorCam Demo and EMC - Lathe
Chris Clough
2002-02-28 11:06:17 UTC
CAM Software
Tim Goldstein
2002-02-28 11:35:34 UTC
Re: [CAD_CAM_EDM_DRO] VectorCam Demo and EMC - Lathe
Tom Benedict
2002-02-28 11:58:15 UTC
Re: [CAD_CAM_EDM_DRO] VectorCam Demo and EMC - Lathe
Tom Benedict
2002-02-28 12:03:35 UTC
Re: [CAD_CAM_EDM_DRO] CAM Software
Chris Clough
2002-02-28 12:16:25 UTC
RE: [CAD_CAM_EDM_DRO] CAM Software
follicely_challenged
2002-02-28 12:51:56 UTC
Re: CAM Software
Chris Clough
2002-02-28 12:53:52 UTC
RE: [CAD_CAM_EDM_DRO] Re: CAM Software
Alan Marconett KM6VV
2002-02-28 13:27:10 UTC
Re: [CAD_CAM_EDM_DRO] VectorCam Demo and EMC - Lathe
Alan Marconett KM6VV
2002-02-28 13:42:46 UTC
Re: VectorCam Demo and EMC - Lathe
vrsculptor
2002-02-28 13:43:36 UTC
Re: CAM Software
Peter
2002-02-28 13:59:52 UTC
Re: [CAD_CAM_EDM_DRO] Re: CAM Software
Bob Campbell
2002-02-28 14:05:49 UTC
RE: [CAD_CAM_EDM_DRO] CAM Software
Tom Benedict
2002-02-28 14:09:08 UTC
Re: [CAD_CAM_EDM_DRO] VectorCam Demo and EMC - Lathe
Alan Marconett KM6VV
2002-02-28 14:19:58 UTC
Re: [CAD_CAM_EDM_DRO] CAM Software
Hugh Currin
2002-02-28 14:29:40 UTC
Re: VectorCam Demo and EMC - Lathe
Alan Marconett KM6VV
2002-02-28 14:39:16 UTC
Re: [CAD_CAM_EDM_DRO] VectorCam Demo and EMC - Lathe
stevenson_engineers
2002-02-28 14:52:51 UTC
Re: CAM Software
Alan Marconett KM6VV
2002-02-28 15:11:23 UTC
Re: VectorCam Demo and EMC - Lathe
Tom Benedict
2002-02-28 18:06:04 UTC
Re: [CAD_CAM_EDM_DRO] VectorCam Demo and EMC - Lathe
Alan Marconett KM6VV
2002-02-28 18:21:07 UTC
Re: [CAD_CAM_EDM_DRO] VectorCam Demo and EMC - Lathe
vrsculptor
2002-02-28 19:17:25 UTC
Re: CAM Software
docholliday01201
2002-02-28 19:33:11 UTC
Re: CAM Software
imserv1
2002-02-28 21:00:51 UTC
Re: VectorCam Demo and EMC - Lathe
Tim Goldstein
2002-02-28 21:04:10 UTC
RE: [CAD_CAM_EDM_DRO] VectorCam Demo and EMC - Lathe
Jon Elson
2002-02-28 23:08:41 UTC
Re: [CAD_CAM_EDM_DRO] VectorCam Demo and EMC - Lathe
Tony Jeffree
2002-02-28 23:23:59 UTC
Re: VectorCam Demo and EMC - Lathe
ptengin@a...
2002-03-01 01:10:58 UTC
[CAD_CAM_EDM_DRO] CAM Software
Tom Benedict
2002-03-01 07:19:09 UTC
Re: [CAD_CAM_EDM_DRO] Re: VectorCam Demo and EMC - Lathe
Tom Benedict
2002-03-03 19:33:19 UTC
Re: [CAD_CAM_EDM_DRO] Re: VectorCam Demo and EMC - Lathe