CAD CAM EDM DRO - Yahoo Group Archive

Re: Gecko's don't like 7 x 10 (stepper resonance)

Posted by mariss92705
on 2002-03-01 10:52:08 UTC
Lee,

Adding a flywheel is a bad thing. It decreases a step motor's already
miserable torque to inertia ratio. That means acceleration will even
slower. Further, the flywheel does nothing to damp resonance, it
simply lowers the resonant frequency and makes the resonance more
severe. The motor still has the same torque, but now it has a much
larger mass to shove around.

Mariss

--- In CAD_CAM_EDM_DRO@y..., "studleylee" <indigo_red@q...> wrote:
> Ballendo, Mariss,
> Would adding a mass ( or flywheel) to the stepper pulley help
> or hinder stepper resonance regions? Any Rule-of-Thumb's (ROT's)?
>
> Also I wonder if the G201 null-adj of the has been done in this
case.
> Thanks,
> -Lee
>
> --- In CAD_CAM_EDM_DRO@y..., "ballendo" <ballendo@y...> wrote:
> > Hello,
> >
> > Sounds like you're hitting a resonant frequency of your
> > machine/structure. Is the "other" machine which doesn't exhibit
> this
> it's likely to be the Geckos)
> > Need more details.
> >
> > Thank you in advance,

Discussion Thread

cdoughtynz 2002-02-28 22:38:03 UTC Gecko's don't like 7 x 10 ballendo 2002-03-01 01:53:20 UTC Re: Gecko's don't like 7 x 10 mariss92705 2002-03-01 07:23:03 UTC Re: Gecko's don't like 7 x 10 studleylee 2002-03-01 08:49:40 UTC Re: Gecko's don't like 7 x 10 (stepper resonance) Jon Elson 2002-03-01 10:27:55 UTC Re: [CAD_CAM_EDM_DRO] Gecko's don't like 7 x 10 mariss92705 2002-03-01 10:52:08 UTC Re: Gecko's don't like 7 x 10 (stepper resonance) stephen_stallings 2002-03-01 11:13:37 UTC Re: Gecko's don't like 7 x 10 (stepper resonance) JanRwl@A... 2002-03-01 19:42:58 UTC Re: [CAD_CAM_EDM_DRO] Gecko's don't like 7 x 10 JanRwl@A... 2002-03-01 19:46:03 UTC Re: [CAD_CAM_EDM_DRO] Gecko's don't like 7 x 10 cdoughtynz 2002-03-02 00:30:34 UTC Re: Gecko's don't like 7 x 10