Re: [CAD_CAM_EDM_DRO] fine-pitch threadcutting on thinwall tubing
Posted by
Doug Fortune
on 2002-03-14 22:34:18 UTC
Brian wrote:
http://www.dakeng.com/turbo.htm TurboCNC
http://www.dakeng.com/lathe.html 7x10 mini-lathe cnc conversion
He has recently got lathe threading working, and I believe he
mentioned he made 20 passes at his 1/4-20 thread (yes, his is
a very small lathe).
Doug Fortune
http://www.cncKITS.com
.
>This sounds like a neat challenge for DaveK and his TurboCNC.
> Hi, it takes a lot of patience and practice. thread galling is a real
> problem no matter what the material. I worked on a project for a screw
> machine shop, it took about a year before the tap design, machine tight
> enough, and feed steady enough. Must be watched constantly as the slightest
> build up of chips will ruin the part. holding the part is also a challange.
> a new cnc machine can do multipass single point quite well.
http://www.dakeng.com/turbo.htm TurboCNC
http://www.dakeng.com/lathe.html 7x10 mini-lathe cnc conversion
He has recently got lathe threading working, and I believe he
mentioned he made 20 passes at his 1/4-20 thread (yes, his is
a very small lathe).
Doug Fortune
http://www.cncKITS.com
.
Discussion Thread
Multi-Volti Devices (Murray)
2002-03-13 21:51:52 UTC
fine-pitch threadcutting on thinwall tubing
Scot Rogers
2002-03-13 23:29:34 UTC
RE: [CAD_CAM_EDM_DRO] fine-pitch threadcutting on thinwall tubing
Sven Peter
2002-03-14 05:46:36 UTC
Re: [CAD_CAM_EDM_DRO] fine-pitch threadcutting on thinwall tubing
Area51tats@a...
2002-03-14 07:06:00 UTC
Re: [CAD_CAM_EDM_DRO] fine-pitch threadcutting on thinwall tubing
Brian
2002-03-14 16:53:30 UTC
Re: [CAD_CAM_EDM_DRO] fine-pitch threadcutting on thinwall tubing
Brian
2002-03-14 16:53:32 UTC
Re: [CAD_CAM_EDM_DRO] fine-pitch threadcutting on thinwall tubing
Raymond Heckert
2002-03-14 19:07:11 UTC
Re: [CAD_CAM_EDM_DRO] fine-pitch threadcutting on thinwall tubing
Smoke
2002-03-14 20:39:13 UTC
Re: [CAD_CAM_EDM_DRO] fine-pitch threadcutting on thinwall tubing
Doug Fortune
2002-03-14 22:34:18 UTC
Re: [CAD_CAM_EDM_DRO] fine-pitch threadcutting on thinwall tubing
Sven Peter
2002-03-15 05:26:48 UTC
Re: [CAD_CAM_EDM_DRO] fine-pitch threadcutting on thinwall tubing