Re: [CAD_CAM_EDM_DRO] fine-pitch threadcutting on thinwall tubing
Posted by
Area51tats@a...
on 2002-03-14 07:06:00 UTC
Nothing is frighteningly difficult after years of learning and practice.
Sounds like it might be a rather tedious boring and turning operation
followed by a little single point internal and external threading. Nothing
overly difficult. Any local machine shop should be able to handle the chore.
Gerald
Iowa
Sounds like it might be a rather tedious boring and turning operation
followed by a little single point internal and external threading. Nothing
overly difficult. Any local machine shop should be able to handle the chore.
Gerald
Iowa
Discussion Thread
Multi-Volti Devices (Murray)
2002-03-13 21:51:52 UTC
fine-pitch threadcutting on thinwall tubing
Scot Rogers
2002-03-13 23:29:34 UTC
RE: [CAD_CAM_EDM_DRO] fine-pitch threadcutting on thinwall tubing
Sven Peter
2002-03-14 05:46:36 UTC
Re: [CAD_CAM_EDM_DRO] fine-pitch threadcutting on thinwall tubing
Area51tats@a...
2002-03-14 07:06:00 UTC
Re: [CAD_CAM_EDM_DRO] fine-pitch threadcutting on thinwall tubing
Brian
2002-03-14 16:53:30 UTC
Re: [CAD_CAM_EDM_DRO] fine-pitch threadcutting on thinwall tubing
Brian
2002-03-14 16:53:32 UTC
Re: [CAD_CAM_EDM_DRO] fine-pitch threadcutting on thinwall tubing
Raymond Heckert
2002-03-14 19:07:11 UTC
Re: [CAD_CAM_EDM_DRO] fine-pitch threadcutting on thinwall tubing
Smoke
2002-03-14 20:39:13 UTC
Re: [CAD_CAM_EDM_DRO] fine-pitch threadcutting on thinwall tubing
Doug Fortune
2002-03-14 22:34:18 UTC
Re: [CAD_CAM_EDM_DRO] fine-pitch threadcutting on thinwall tubing
Sven Peter
2002-03-15 05:26:48 UTC
Re: [CAD_CAM_EDM_DRO] fine-pitch threadcutting on thinwall tubing