Subject: Re: Re: flashcut 9000 series mill - Question from Marcus

Marcus,

Yes, I do this kind of work - As a matter of fact I build the larger Flashcut machines for them (as well as those I sell under the Cardinal Engineering name and a couple of other private labels) - And I also publish the full plans for doing it yourself in HOME SHOP MACHINIST magazine with sources - Some folks want to do their own and some folks want to pay someone else to do it and make chips instead - I've always felt that the nice thing about this is that you can choose your own approach and either one is just as "legitimate" - The plans for the Grizzly G1005 retrofit are currently being published in HSM in about 4 successive issues - The Grizzly G1006 will follow along with detailed info on getting those "dead" Bridgeport CNC's running again

Been doing some work on a special waterjet cutting machine for balsa and plywood model airplane parts because I really hate the charred edges produced by the lasers - Am currently using a single nozzle but am making a special table with a 6 nozzle cutting head for it which should make the system commercially viable - Can furnish samples to those who might be interested

Have a new e-mail address and have had a hard time posting back into the group - That coupled with the fact that I've been traveling for the last 6 weeks or so - new address is cardinal.eng@... - old one was - cardinal.eng@... which should still work for a while

Roland Friestad (Friestad is the Norwegian spelling - Friestadt is the German)

****************
Re: Message: 17 - Digest 2149
Date: Tue, 12 Mar 2002 09:16:20 -0800
From: "Marcus & Eva" <implmex@...>
Subject: Re: Re: flashcut 9000 series mill

Hi all:
Doesn't Roland Friestadt (sp?) (Cardinal Engineering) do this kind of
retrofit work??
Roland, are you out there...Comments??
Cheers

Marcus

----- Original Message -----
From: "CL" <datac@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Tuesday, March 12, 2002 6:08 AM
Subject: Re: [CAD_CAM_EDM_DRO] Re: flashcut 9000 series mill


[Non-text portions of this message have been removed]