Re: [CAD_CAM_EDM_DRO] Subject: Re: Re: flashcut 9000 series mill - Question from Marcus

Hi Roland:
Could you tell us a bit more about the large Flashcut machine??
It seems to have sparked a fair number of comments on this list but no one
seems to know a lot about it.
Cheers

Marcus

----- Original Message -----
From: "Roland Friestad" <cardinal.eng@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Saturday, March 16, 2002 4:31 AM
Subject: [CAD_CAM_EDM_DRO] Subject: Re: Re: flashcut 9000 series mill -
Question from Marcus


> Marcus,
>
> Yes, I do this kind of work - As a matter of fact I build the larger
Flashcut machines for them (as well as those I sell under the Cardinal
Engineering name and a couple of other private labels) - And I also publish
the full plans for doing it yourself in HOME SHOP MACHINIST magazine with
sources - Some folks want to do their own and some folks want to pay someone
else to do it and make chips instead - I've always felt that the nice thing
about this is that you can choose your own approach and either one is just
as "legitimate" - The plans for the Grizzly G1005 retrofit are currently
being published in HSM in about 4 successive issues - The Grizzly G1006 will
follow along with detailed info on getting those "dead" Bridgeport CNC's
running again
>
> Been doing some work on a special waterjet cutting machine for balsa and
plywood model airplane parts because I really hate the charred edges
produced by the lasers - Am currently using a single nozzle but am making a
special table with a 6 nozzle cutting head for it which should make the
system commercially viable - Can furnish samples to those who might be
interested
>
> Have a new e-mail address and have had a hard time posting back into the
group - That coupled with the fact that I've been traveling for the last 6
weeks or so - new address is cardinal.eng@... - old one was -
cardinal.eng@... which should still work for a while
>
> Roland Friestad (Friestad is the Norwegian spelling - Friestadt is the
German)
>
> ****************
> Re: Message: 17 - Digest 2149
> Date: Tue, 12 Mar 2002 09:16:20 -0800
> From: "Marcus & Eva" <implmex@...>
> Subject: Re: Re: flashcut 9000 series mill
>
> Hi all:
> Doesn't Roland Friestadt (sp?) (Cardinal Engineering) do this kind of
> retrofit work??
> Roland, are you out there...Comments??
> Cheers
>
> Marcus
> ----- Original Message -----
> From: "CL" <datac@...>
> To: <CAD_CAM_EDM_DRO@yahoogroups.com>
> Sent: Tuesday, March 12, 2002 6:08 AM
> Subject: Re: [CAD_CAM_EDM_DRO] Re: flashcut 9000 series mill
>
>
> [Non-text portions of this message have been removed]
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://www.jobshophomeshop@yahoogroups.com I consider this as a sister
site to the CCED group, as many of the same memembers are there, for OT
subjects, that are not allowed on the CCED list.
>
>
>
> Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Mom
> List Owner
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>