Re: [CAD_CAM_EDM_DRO] How to mount rails on surface plate?

There are also chemical anchors used to anchor machine tools to concrete.
the come packaged in various sized glass containers you just drop in a hole
and use the piece of threaded rod used as the anchor connected to a drill
motor to crush and mix the compounds. When an anchor of this type fails it
usually the concrete that fails before the chemical anchor.

----- Original Message -----
From: "John H." <johnhe-uk@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Friday, April 19, 2002 5:50 PM
Subject: Re: [CAD_CAM_EDM_DRO] How to mount rails on surface plate?


> > Any thoughts on how to attach THK type rails to a granite surface
> > plate? I was considering using a cheap one for a machine base on a
> > 24X36 router. I've seen CMM's built this way.
>
> Rock climbers use a type of glue to chemically anchor metal pegs into rock
> faces. I've no idea how well it'd work here but it's something else to
have
> a look into.
>
> John H.
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this as a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
>
>
>
> Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Mom
> List Owner
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>