Re: [CAD_CAM_EDM_DRO] Power supply question.....

> If you have only 3 wires on the secondary, and get 28v from start wire to
> the tap, and 32v from start to finish, then it's not a ct (center-tapped)
> transformer, just a tapped transformer. If there are 5 wires, then it's
> probably a tapped bi-filar, with a common center-tap. That's all I can
> surmise from your description.
>
> RayHex
>
> ----------
> > From: RC <asdf@...>
> > Now, what about transformers.... the one I am using has a ct and two end
> > taps.... when measure with a voltmeter, the ct and one end connection
> reads
> > 28 vac, but the two end ones read, 32 vac. My question is, can one use
> any
> > combination of connection without being a problem?
> >
> > Thanks again,
> > RC
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto: aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this as a sister site to the CCED group, as many of the same members are there, for OT subjects, that are not allowed on the CCED list.
>
> Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Mom
> List Owner
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/