Re: IT'S ALIVE!!!
Posted by
mariss92705
on 2002-04-24 09:45:07 UTC
Hi,
Sorry about that. The G420 is a brushless DC servomotor drive. The
specs are the same as for the G320 except it drives 3-phase brushless
motors.
I've only have the prototype board (the one with the 4,789 mistakes)
running right now. There is still a lot of testing to be done on it
so it will be a while before it is ready for prime time. I have to
tease any bad behavior that might be hiding out of it and that takes
time.
The main thing is it runs very nicely. I didn't think it would
because this is my first design try at a brushless drive.
Mariss
Sorry about that. The G420 is a brushless DC servomotor drive. The
specs are the same as for the G320 except it drives 3-phase brushless
motors.
I've only have the prototype board (the one with the 4,789 mistakes)
running right now. There is still a lot of testing to be done on it
so it will be a while before it is ready for prime time. I have to
tease any bad behavior that might be hiding out of it and that takes
time.
The main thing is it runs very nicely. I didn't think it would
because this is my first design try at a brushless drive.
Mariss
--- In CAD_CAM_EDM_DRO@y..., "audiomaker2000" <audiomaker@s...> wrote:
> Mariss,
> I must have missed the details on the development of this new drive.
> Could you tell us what is new and different about it from the "3"
> series?
>
> Thanks
> Sean
>
>
> --- In CAD_CAM_EDM_DRO@y..., "mariss92705" <mariss92705@y...> wrote:
> > Hi,
> >
> > I just got the G420 prototype to come alive. It works! It turns!
> It
> > servos! This is after correcting 4,723 board layout mistakes
today.
> >
> > Mariss
Discussion Thread
mariss92705
2002-04-23 21:49:52 UTC
IT'S ALIVE!!!
Carey L. Culpepper
2002-04-24 08:32:06 UTC
Re: [CAD_CAM_EDM_DRO] IT'S ALIVE!!!
audiomaker2000
2002-04-24 08:42:11 UTC
Re: IT'S ALIVE!!!
mariss92705
2002-04-24 09:45:07 UTC
Re: IT'S ALIVE!!!
Tim Goldstein
2002-04-24 09:58:19 UTC
Re: [CAD_CAM_EDM_DRO] Re: IT'S ALIVE!!!
mariss92705
2002-04-24 10:55:00 UTC
Re: IT'S ALIVE!!!
David Eldredge
2002-04-24 13:31:24 UTC
Re: [CAD_CAM_EDM_DRO] Re: IT'S ALIVE!!!
carlosandpeppes
2006-12-07 19:18:59 UTC
IT'S ALIVE!!!
Horace, T.L.Ho
2006-12-08 04:55:16 UTC
Re: IT'S ALIVE!!!
Phil Mattison
2006-12-08 07:56:31 UTC
Re: IT'S ALIVE!!!
thicar88
2006-12-08 08:37:27 UTC
Re: IT'S ALIVE!!!
John Dammeyer
2006-12-08 09:03:46 UTC
Mounting Z axis DRO
John Hansford
2006-12-08 09:15:35 UTC
Re: Mounting Z axis DRO
John Dammeyer
2006-12-08 09:25:59 UTC
RE: [CAD_CAM_EDM_DRO] Re: Mounting Z axis DRO
John Hansford
2006-12-08 09:36:04 UTC
Re: Mounting Z axis DRO
John Hansford
2006-12-08 09:44:10 UTC
Re: Mounting Z axis DRO
John Hansford
2006-12-08 09:49:03 UTC
Re: Mounting Z axis DRO
John Dammeyer
2006-12-08 10:14:30 UTC
RE: [CAD_CAM_EDM_DRO] Re: Mounting Z axis DRO
John Dammeyer
2006-12-08 11:33:55 UTC
RE: [CAD_CAM_EDM_DRO] Re: Mounting Z axis DRO
John Hansford
2006-12-08 16:16:54 UTC
Re: Mounting Z axis DRO
John Dammeyer
2006-12-08 17:34:51 UTC
RE: [CAD_CAM_EDM_DRO] Re: Mounting Z axis DRO
John Hansford
2006-12-08 17:48:14 UTC
Re: Mounting Z axis DRO
John Dammeyer
2006-12-08 18:11:24 UTC
RE: [CAD_CAM_EDM_DRO] Re: Mounting Z axis DRO
John Hansford
2006-12-08 18:55:32 UTC
Re: Mounting Z axis DRO
John Dammeyer
2006-12-08 19:42:03 UTC
RE: [CAD_CAM_EDM_DRO] Re: Mounting Z axis DRO
John Hansford
2006-12-08 20:11:28 UTC
Re: Mounting Z axis DRO
John Dammeyer
2006-12-08 21:06:10 UTC
RE: [CAD_CAM_EDM_DRO] Re: Mounting Z axis DRO
John Hansford
2006-12-08 21:15:43 UTC
Re: Mounting Z axis DRO
Lester Caine
2006-12-09 09:59:10 UTC
Re: [CAD_CAM_EDM_DRO] Re: Mounting Z axis DRO
John Dammeyer
2006-12-09 11:24:31 UTC
RE: [CAD_CAM_EDM_DRO] Re: Mounting Z axis DRO