Re: [CAD_CAM_EDM_DRO] Program to download to lathe Fanuc quirks settings for RS232 issues?
Posted by
bjammin@i...
on 2002-06-11 04:47:31 UTC
>> A while back (8 years), I made a NULL modem cable for a guy andAll you need is two pins connected. I fed a Boss 5 this way for years,
>> couldnt get it to work with his Fanuc control
using a small comm prog called 'Mite' and running from an 8088. I'd say
check your cable out first. Not sure which pins now, maybe 2 and 7? Anyone?
Your manual should tell you.
Regards, Hoyt
Anti-virus request: Please do not add this email addy to address books
Belfab CNC - http://www.freeyellow.com/members/belfab/belfab.html
US Best MC - http://www.freeyellow.com/members/batwings/best.html
Camping/Caving - http://www.freeyellow.com/members/batwings/caving.html
Trust the crowing of the cock but not the tolling of the clock
Discussion Thread
John
2002-06-10 08:16:59 UTC
Program to download to lathe, Telix + Orac
studleylee
2002-06-10 09:08:14 UTC
Re: Program to download to lathe, Telix + Orac
studleylee
2002-06-10 12:02:59 UTC
Program to download to lathe Fanuc quirks settings for RS232 issues?
John
2002-06-10 17:20:49 UTC
Re: [CAD_CAM_EDM_DRO] Re: Program to download to lathe, Telix + Orac
bjammin@i...
2002-06-11 04:47:31 UTC
Re: [CAD_CAM_EDM_DRO] Program to download to lathe Fanuc quirks settings for RS232 issues?
steveggca
2002-06-11 05:25:16 UTC
Re: Program to download to lathe Fanuc quirks settings for RS232 issues?
bjammin@i...
2002-06-11 05:42:12 UTC
Re: [CAD_CAM_EDM_DRO] Re: Program to download to lathe Fanuc quirks settings for RS232 issues?
steveggca
2002-06-11 07:03:15 UTC
Re: Program to download to lathe Fanuc quirks settings for RS232 issues?