CAD CAM EDM DRO - Yahoo Group Archive

Re: Program to download to lathe Fanuc quirks settings for RS232 issues?

Posted by steveggca
on 2002-06-11 05:25:16 UTC
strictly speaking you need 3 wires, signal ground-7
send-2 and recieve-3 it is common and even necessary to send
programs back from the control to the computer. programs are almost
always edited on the machine, so saving a copy for later use is
handy.

Some null cables are wired 2-2 and 3-3 this will not work on Fanuc.
many(most) PC serial ports auto switch the send/recieve pins. Fanuc
does not. it must be wired 2-3 and 3-2

As well for a 3 wire cable Fanuc pins 4-5 and 6-8-20 Must be jumpered
together.

--- In CAD_CAM_EDM_DRO@y..., bjammin@i... wrote:
> >> A while back (8 years), I made a NULL modem cable for a guy and
> >> couldnt get it to work with his Fanuc control
>
> All you need is two pins connected. I fed a Boss 5 this way for
years,
> using a small comm prog called 'Mite' and running from an 8088.
I'd say
> check your cable out first. Not sure which pins now, maybe 2 and
7? Anyone?
> Your manual should tell you.
>
> Regards, Hoyt
>
>
> Anti-virus request: Please do not add this email addy to address
books
> Belfab CNC - http://www.freeyellow.com/members/belfab/belfab.html
> US Best MC -
http://www.freeyellow.com/members/batwings/best.html
> Camping/Caving -
http://www.freeyellow.com/members/batwings/caving.html
> Trust the crowing of the cock but not the tolling of the clock

Discussion Thread

John 2002-06-10 08:16:59 UTC Program to download to lathe, Telix + Orac studleylee 2002-06-10 09:08:14 UTC Re: Program to download to lathe, Telix + Orac studleylee 2002-06-10 12:02:59 UTC Program to download to lathe Fanuc quirks settings for RS232 issues? John 2002-06-10 17:20:49 UTC Re: [CAD_CAM_EDM_DRO] Re: Program to download to lathe, Telix + Orac bjammin@i... 2002-06-11 04:47:31 UTC Re: [CAD_CAM_EDM_DRO] Program to download to lathe Fanuc quirks settings for RS232 issues? steveggca 2002-06-11 05:25:16 UTC Re: Program to download to lathe Fanuc quirks settings for RS232 issues? bjammin@i... 2002-06-11 05:42:12 UTC Re: [CAD_CAM_EDM_DRO] Re: Program to download to lathe Fanuc quirks settings for RS232 issues? steveggca 2002-06-11 07:03:15 UTC Re: Program to download to lathe Fanuc quirks settings for RS232 issues?