CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] Re: Dedicated mb for PID

Posted by Jon Elson
on 2002-06-29 16:43:46 UTC
vavaroutsos wrote:

> Jon, what FPGA did you have in mind? I haven't looked at all the
> latest and greates, but I don't know of any that have on board DACs
> or differential line receivers. Did you intednd to use an FPGA for
> bus interface, quadrature decoding, and general purpose I/O (gpio)
> with external DACs, opto isolators, and line receivers?
>
> I think this will cost more than $30. If enough people are interested
> in designing a low cost servo interface card like this, I'll
> volunteer for schematics and FPGA code. Now all we need is PCB
> layout/fab, parts, assembly, and software support in EMC.

I use a Xilinx XC9572 in my DAC and DIO boards, and the XCS30
in the universal stepper board. I use the XCS10 in the PPMC encoder
counter board. The XCS10 is about $18, the XCS30 is $30, and the
XC9572 is only $6!

I have the Xilinx software and a pretty expensive PCB package.
I'm also getting quite familiar with EMC internals.

Jon

Discussion Thread

Doug Harrison 2002-06-28 20:18:33 UTC Dedicated mb for PID Jon Elson 2002-06-28 22:55:46 UTC Re: [CAD_CAM_EDM_DRO] Dedicated mb for PID Doug Harrison 2002-06-29 07:48:59 UTC Re: Dedicated mb for PID vavaroutsos 2002-06-29 09:12:00 UTC Re: Dedicated mb for PID Brian Pitt 2002-06-29 09:27:10 UTC Re: [CAD_CAM_EDM_DRO] Re: Dedicated mb for PID Doug Harrison 2002-06-29 09:42:56 UTC Re: [CAD_CAM_EDM_DRO] Re: Dedicated mb for PID vavaroutsos 2002-06-29 10:02:26 UTC Re: Dedicated mb for PID Doug Harrison 2002-06-29 10:33:55 UTC Re: [CAD_CAM_EDM_DRO] Re: Dedicated mb for PID Nic van der Walt 2002-06-29 12:20:52 UTC RE: [CAD_CAM_EDM_DRO] Re: Dedicated mb for PID Joll503@A... 2002-06-29 14:39:03 UTC Re: [CAD_CAM_EDM_DRO] Dedicated mb for PID Jon Elson 2002-06-29 16:37:46 UTC Re: [CAD_CAM_EDM_DRO] Re: Dedicated mb for PID Jon Elson 2002-06-29 16:43:46 UTC Re: [CAD_CAM_EDM_DRO] Re: Dedicated mb for PID Jon Elson 2002-06-29 16:46:13 UTC Re: [CAD_CAM_EDM_DRO] Re: Dedicated mb for PID Doug Harrison 2002-06-29 18:43:47 UTC Re: [CAD_CAM_EDM_DRO] Re: Dedicated mb for PID Doug Harrison 2002-06-29 18:48:10 UTC Re: [CAD_CAM_EDM_DRO] Re: Dedicated mb for PID vavaroutsos 2002-06-30 00:25:44 UTC Re: Dedicated mb for PID Les Watts 2002-06-30 05:09:02 UTC Re: [CAD_CAM_EDM_DRO] Re: Dedicated mb for PID Doug Harrison 2002-06-30 09:34:14 UTC Re: [CAD_CAM_EDM_DRO] Re: Dedicated mb for PID Jon Elson 2002-06-30 17:36:10 UTC Re: [CAD_CAM_EDM_DRO] Re: Dedicated mb for PID Les Watts 2002-07-01 07:29:08 UTC Re: [CAD_CAM_EDM_DRO] Re: Dedicated mb for PID