Re: [CAD_CAM_EDM_DRO] Re: Dedicated mb for PID
Posted by
Doug Harrison
on 2002-06-29 18:43:47 UTC
> Qbasic? My servo amps have a velocity bandwidth of about 3 KHz,OK, what about some form of compiled basic? 8KHz should be possible in dos.
> higher than the EMC servo update rate in my system. I suspect that
> you'd have trouble doing a decent PID algorithm at a reasonable
> rate in software on a $10 micro.
>
> Jon
Doug
Discussion Thread
Doug Harrison
2002-06-28 20:18:33 UTC
Dedicated mb for PID
Jon Elson
2002-06-28 22:55:46 UTC
Re: [CAD_CAM_EDM_DRO] Dedicated mb for PID
Doug Harrison
2002-06-29 07:48:59 UTC
Re: Dedicated mb for PID
vavaroutsos
2002-06-29 09:12:00 UTC
Re: Dedicated mb for PID
Brian Pitt
2002-06-29 09:27:10 UTC
Re: [CAD_CAM_EDM_DRO] Re: Dedicated mb for PID
Doug Harrison
2002-06-29 09:42:56 UTC
Re: [CAD_CAM_EDM_DRO] Re: Dedicated mb for PID
vavaroutsos
2002-06-29 10:02:26 UTC
Re: Dedicated mb for PID
Doug Harrison
2002-06-29 10:33:55 UTC
Re: [CAD_CAM_EDM_DRO] Re: Dedicated mb for PID
Nic van der Walt
2002-06-29 12:20:52 UTC
RE: [CAD_CAM_EDM_DRO] Re: Dedicated mb for PID
Joll503@A...
2002-06-29 14:39:03 UTC
Re: [CAD_CAM_EDM_DRO] Dedicated mb for PID
Jon Elson
2002-06-29 16:37:46 UTC
Re: [CAD_CAM_EDM_DRO] Re: Dedicated mb for PID
Jon Elson
2002-06-29 16:43:46 UTC
Re: [CAD_CAM_EDM_DRO] Re: Dedicated mb for PID
Jon Elson
2002-06-29 16:46:13 UTC
Re: [CAD_CAM_EDM_DRO] Re: Dedicated mb for PID
Doug Harrison
2002-06-29 18:43:47 UTC
Re: [CAD_CAM_EDM_DRO] Re: Dedicated mb for PID
Doug Harrison
2002-06-29 18:48:10 UTC
Re: [CAD_CAM_EDM_DRO] Re: Dedicated mb for PID
vavaroutsos
2002-06-30 00:25:44 UTC
Re: Dedicated mb for PID
Les Watts
2002-06-30 05:09:02 UTC
Re: [CAD_CAM_EDM_DRO] Re: Dedicated mb for PID
Doug Harrison
2002-06-30 09:34:14 UTC
Re: [CAD_CAM_EDM_DRO] Re: Dedicated mb for PID
Jon Elson
2002-06-30 17:36:10 UTC
Re: [CAD_CAM_EDM_DRO] Re: Dedicated mb for PID
Les Watts
2002-07-01 07:29:08 UTC
Re: [CAD_CAM_EDM_DRO] Re: Dedicated mb for PID