CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] Re: Dedicated mb for PID

Posted by Jon Elson
on 2002-06-30 17:36:10 UTC
vavaroutsos wrote:

> Jon, what are you using for DACs? Did you implement a delta sigma in
> the FPGA/CPLD with external op-amp filtering?

No, the clock rates become insane when you talk about anything over
12 bits and above several hundred Hz update rate. I use the Burr Brown
DAC7644E, which is a 48-pin chip about the size of a standard 14-pin
DIP! A real bear to solder, but it has all the features I needed, especially
the capability to go to mid-range (zero volts) from one external signal.
That is what it does for E-stop. This is a 4-channel 16-bit DAC.

Jon

Discussion Thread

Doug Harrison 2002-06-28 20:18:33 UTC Dedicated mb for PID Jon Elson 2002-06-28 22:55:46 UTC Re: [CAD_CAM_EDM_DRO] Dedicated mb for PID Doug Harrison 2002-06-29 07:48:59 UTC Re: Dedicated mb for PID vavaroutsos 2002-06-29 09:12:00 UTC Re: Dedicated mb for PID Brian Pitt 2002-06-29 09:27:10 UTC Re: [CAD_CAM_EDM_DRO] Re: Dedicated mb for PID Doug Harrison 2002-06-29 09:42:56 UTC Re: [CAD_CAM_EDM_DRO] Re: Dedicated mb for PID vavaroutsos 2002-06-29 10:02:26 UTC Re: Dedicated mb for PID Doug Harrison 2002-06-29 10:33:55 UTC Re: [CAD_CAM_EDM_DRO] Re: Dedicated mb for PID Nic van der Walt 2002-06-29 12:20:52 UTC RE: [CAD_CAM_EDM_DRO] Re: Dedicated mb for PID Joll503@A... 2002-06-29 14:39:03 UTC Re: [CAD_CAM_EDM_DRO] Dedicated mb for PID Jon Elson 2002-06-29 16:37:46 UTC Re: [CAD_CAM_EDM_DRO] Re: Dedicated mb for PID Jon Elson 2002-06-29 16:43:46 UTC Re: [CAD_CAM_EDM_DRO] Re: Dedicated mb for PID Jon Elson 2002-06-29 16:46:13 UTC Re: [CAD_CAM_EDM_DRO] Re: Dedicated mb for PID Doug Harrison 2002-06-29 18:43:47 UTC Re: [CAD_CAM_EDM_DRO] Re: Dedicated mb for PID Doug Harrison 2002-06-29 18:48:10 UTC Re: [CAD_CAM_EDM_DRO] Re: Dedicated mb for PID vavaroutsos 2002-06-30 00:25:44 UTC Re: Dedicated mb for PID Les Watts 2002-06-30 05:09:02 UTC Re: [CAD_CAM_EDM_DRO] Re: Dedicated mb for PID Doug Harrison 2002-06-30 09:34:14 UTC Re: [CAD_CAM_EDM_DRO] Re: Dedicated mb for PID Jon Elson 2002-06-30 17:36:10 UTC Re: [CAD_CAM_EDM_DRO] Re: Dedicated mb for PID Les Watts 2002-07-01 07:29:08 UTC Re: [CAD_CAM_EDM_DRO] Re: Dedicated mb for PID